Key Specifications/Special Features:
Three-color LED display
Left and right direction indicator
BiBi-alarm sound Sensors itself can detect the fautly sensors if abnormal situation appeared
Optional insert-in sensors
Rated voltage: 12V
Operating range: 9 - 16V
Rated current: 20 - 200mA
Detecting distance: 0.30 - 2.5m
Ultrasonic frequency: 40kHz
Working temperature: -30 - +70 degree Celsius
Testing:
1. Connect the power wire of the control box correctly.
2. Connect the monitor with the control box. Put the shift lever to reverse gear to start the system up, and the monitor will send a sound
of warning.For LED or LCD series, the displays show "--" or "." at the same time. It indicates the system is under detecting status.
3. After the installation of sensors, adjust the direction to the correct, then arrange the wires in good order. Connect one sensor with
corresponding outlet in the control box. It can operate normally if person stands in 1.0M. Check each of the sensors separately
according to this way. Then connect all of them with the control box.
4. Enter into the back gear to make the system working. Lay an obstacle behind the car, change the distance and orientation to test
the system. If the system with 6~8 sensors is installed, switch off the power after finishing the test of reverse detection, move the
obstacle to the front of the car, then apply the brake to test the front detection.
5. Notes:
a. While the reverse gear is engaged, although to put on the brake, the system with 6~8 sensors only checks the place behind the
car.
b. Switch off the brake power, the system with 6~8 sensors will still keep working for 10 seconds.
Packing Box(Universal):
):
Audited Supplier 
){kind=link}
){kind=link}