Guangzhou, Guangdong, China
Member Since: 2018
Business Type: Manufacturer/Factory,Trading Company
The dry leather production line of the synthetic leather is applied to the release paper of various textures by the coating method of PU resin, and after drying and pasting, the base fabric (knit cloth, non-woven fabric) is attached as a base material. The process of combining, drying and the like makes the pattern of the product the same as that of various release papers, and then the printing process, so that it is comparable to the leather in terms of touch, toughness and appearance.
Shoes, leather bags, furniture, clothing, sports equipment, etc.
1, high precision coating machine
Equipped with automatic feeding system, automatic precision monitoring and control, uniform and accurate coating accuracy.
2, laminating machine
Special design, the base fabric is untensioned and stretched out, so that the base fabric is stable in tension, and the bonding equipment has two functions of strong sticking and hanging (soft sticking), which makes the quality of the base fabric and the product better and the yield is higher.
3. Hot air circulation type drying furnace device
Fully automatic computer temperature control, accurate temperature average, with good insulation effect, saving heat source.
4, cutting center coiler
Cutting and receiving materials, safe and efficient, easy to operate, reduce the loss of finished products.
5, driving tension
Fully automatic tension air pressure control system with stable tension and low paper breaking rate.
1. Mechanical spoke Max: 1700mm;
2, product width Max: 1450mm;
3. Mechanical speed Max: 30m/min;
4, oven length: 10m, 15m, 25m
5. Transmission system: The whole line of variable frequency motor is linked;
6. Unit composition: agreed by the user at the time of ordering;
7, the total supporting power: 150kw.
The production line consists of units such as unwinding, gluing, fabricating, adjusting, drying, post-tracting, fabricating, coiling, exhausting, and control systems, and is mainly used for rubber sheet coating operations. It can meet the three operation requirements of single coating, overcoating and fabric lamination.
With the gap forming method, the base fabric is applied to the base fabric by a gap formed between the rubber coating roller and the coating blade. The gap of the knife gap is automatically tracked and digitally displayed. Its compact structure, advanced control, safety and explosion-proof, complete functions. The temperature control has PID calculation function, the operation control adopts programmable logic controller (PLC), the speed control system adopts frequency converter speed regulation, the control precision is high, the operation is stable, the running speed digital display is intuitive and clear. The unique heating and drying system is extremely efficient and ensures high productivity of the entire system.
The main technical parameters
1. Effective width of roll surface: 1800-2200mm
2, coating width (max): 1600-2000mm
3, coating speed: 3 ~ 30m / min frequency control, forward and reverse operation
4, coating thickness: min: 0.1mm, max: 0.8mm
5, glue accuracy: ± 0. 01mm
6, squeegee form: comma knife
7, the diameter of the rubber roller: φ400mm
8, the maximum gap between the coating blade and the roller surface: 80mm
9, operation requirements: single coating, coating, cloth
10, the maximum length of coating: 50-80m
11, open diameter (max): φ400mm
12, winding diameter (max): φ700mm