• UV-Resistant Fiberglass Coated Plywood Sandwich Panel
  • UV-Resistant Fiberglass Coated Plywood Sandwich Panel
  • UV-Resistant Fiberglass Coated Plywood Sandwich Panel

UV-Resistant Fiberglass Coated Plywood Sandwich Panel

Usage: Environmental Protection, Industral
Product Categories: Fiberglass Board
Molding Method: Thermosetting
Material: Water Resistant Plywood
Fiber Type: GFRP
Type: Polyester FRP
Customization:
Diamond Member Since 2016

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Model NO.
HY3Ply
Plywood Panel
Waterproof Plywood
Color
Ral or Ncs or Customer Shade
FRP Skin Thickness
1-5mm
Maximum Width
2700mm
Maximum Length
17.5m
Bonding Tech
Negative Pressure
Transport Package
Standard Seaworthy Pallet, Film on Each Panel
Specification
standard 1220*2440
Trademark
Hengyi
Origin
Jiangsu China
HS Code
7019909000
Production Capacity
100000sqm

Product Description

UV-resistant Fiberglass coated Plywood sandwich panel
FRP plywood Fiberglass-reinforced-plastic
(FRP) overlaid plywood is an engineered product consisting of plywood securely bonded between tough glass fiber-reinforced resin
surfaces. The composite produces a strong yet lightweight panel. A thin nonporous surface finish provides color, weather ability and
additional durability. Different surface finishes are available. Glass content and overall thickness of the over-lay can be varied to suit the
performance requirements and economies of a wide variety of end-use applications.
 
Specifications

Overlay materials: Overlay Materials may consist of
(1) Fiberglass woven roving saturated with resin cured under heat and pressure
(2) glass-fiber mats saturated with resin, partially cured, bonded to plywood substrate and final cured in a hot press under heat and
pressure, or(3) chopped glass strand and resin in sprayed up process, cured under ambient conditions or with heat. Overlay thickness
typically ranges from 1.0-2.0mm.
UV-Resistant Fiberglass Coated Plywood Sandwich Panel
Glass reinforcing: Both the amount of glass and its form influence structural capability of the finished composite. Glass contents typically range from 3/4 ounce to 3 ounces per square foot. Long or continuous fibers oriented parallel to the maximum stress are preferred for heavy loads. Randomly oriented fibers provide strength in all directions
Core: Overlay materials are bonded to plywood panels 1/4 inch to 1-1/8 inches or thicker. The plywood grade and thickness, form and weight of fiberglass reinforcement, and formulation and quality of resin can be varied, depending on the desired balance between cost &performance.
Glass fiber surfaces: Surfaces may vary from extremely smooth and flat, to pebble embossed, to anti-slip (textured skid-resistant) and water ripple surfaces.All surfaces are seamless and thus easily cleaned.
Surface finish: impervious to stains, alkalis and solvents, impact and abrasions, and odors.
High gloss with gel coat or sub gloss.
Color: Pigmentation is added in manufacture, during application of the surface finish. RAl colors are available, Some applications require minimum production runs. Pigmenting the finish strengthens panels against ultraviolet and weathering, and normally eliminates the need for painting.
Sizes: FRP plywood is available in 4 x 8-foot panels as well as in large seamless body panels 8 to 10 feet wide and 45 or more feet long for truck and trailer bodies, containers or other applications.
Uses and Advantages FRP plywood is used for truck, trailer and van bodies, intermodal and reusable shipping containers, concrete forming, sewage treatment tanks, walk-in coolers, railcar linings and siding panels, and numerous other demanding applications.

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now