Basic Info.
Product Description
High Power UV LED module/lamp
( 100W/200W Spotlight 60D - COB type )
UVA 365nm - 405nm
Key Features
- 365nm irradiation intensity 9W/cm2 ~ 10W/cm2
- 395nm irradiation intensity 10W/cm2 ~ 16W/cm2
- Easy use for Linear UV light source.
- Environmentally friendly: RoHS compliant, mercury-free.
- with Quartz glass to focus to 60 degree of angle, for more deep distance.
- Board dimension of 55mm x 20mm, Basic power 100W/200W With fine heat dissipation.
Easy use for Linear UV light source
How to install the UV LED unit into modules?
You must need:
1.) Air/Water cooling heat sink:
The lower temperature you maintain on the COB board,the more intensity power you can run up to, along with longer life span.
2.) UV LED power driver
It's better with dimming function, but must be constant current supply.
The Easiest installation Powerful High Power Board to Start UV LED Curing !
Our customer's project for reference !!
Technology of Overviews
The Multi-chips LED package benefit from innovations in device technology, chip package and thermalmanagement. This suite of technologies give engineers and system designers the freedom to develop solutions both high in power and efficiency.
- The Technology -
Our technology enables to emit large area photons uniformly over the entire COB UV LED surface. The intense optical power density produced by these multi-chips facilitate designs which replace mercury lamps where arrays of traditional power LEDs cannot.
For UV devices, the side-less structure to let the engineers easy to design the linear UV LED light source and instead of the linear mercury lamps with power density 80W/cm -120W/cm.
- Packaging Technology -
Thermal management is critical in high power LED applications. The UV LEDs have the lowest thermal resistance of any LED on the market with a thermal resistance from junction to heat sink of 0.3°C/W or 0.35°C/W. This allows the LED to be driven at higher current densities while maintaining a low junction temperature, thereby resulting in brighter solutions and longer lifetimes.
- Reliability Technology -
Designed from the ground up, the COB Multi-chips LEDs are one of the most reliable light sources in the world today. COB Multi-chips LEDs have passed a rigorous suite of environmental and mechanical stress tests, including mechanical shock, vibration, temperature cycling and humidity, and high current applications. With very low failure rates and median lifetimes that typically exceed 10,000 hours, the COB Multi-chips LEDs are ready for evern the most demanding applications.
- Environmental Benefits -
Our LEDs help reduce power consumption and the amount of hazardous waste entering the environment. All COB Multi-chips LED products manufactured by us are RoHS compliant and free fo hazardous materials, including lead and mercury.
The Advantages of COB Multi-chips LEDs
Every LED is fully designed to ensure that it meets the high quality standards expected from our products.
>>> Low Thermal Resistance <0.16°C/W / High thermal conductivity 401W/(m.K)
Copper Substrate and LED Chip Direct Bonding on Cu Base
>>> Special Reflecting Surface
No Ag Plating, Anti-Sulfide, and Low Light Decay.
>>> Ni Coating at the Cu substrate bottom
Anti-Oxidized and SMT Compatible.
COB Multi-chips LEDs
Package Dimensions (mm)
1.) | LED Array : | 12s x3 |
2.) | Typical Voltage: | 46V |
3.) | Operating Current: | 700mA x3 |
Notes: (1) All dimensions are in millimeters. (2) Tolerance is ±0.25mm
1.) | LED Array : | 12s x6 |
2.) | Typical Voltage: | 46V |
3.) | Operating Current: | 700mA x6 |
Notes: (1) All dimensions are in millimeters. (2) Tolerance is ±0.25mm
Electrical/Optical Characteristics (Ta=25°C)
Optical Characteristics (Ta=25°C)
Parameter | Symbol | Wavelength | Conditions | Min. | Typ. | Max. | Units |
Irradiance Note[1] | Ee | 365-375nm | IF=700mA x3 | - | 10 | - | W/cm2 |
390-400nm | - | 16 | - |
400-420nm | - | 16 | - |
Note: [1] Irradiance measured by EIT UV Power Puck II Meter, and the distance of test is 5 mm.
Electronic Characteristics (Ta=25°C)
Parameter | Symbol | Conditions | Min. | Typ. | Max. | Units |
Forward Voltage | VF | IF=700mA x3 | 37 | 46 | 53 | V |
Thermal Resistance JunctionTo Board | RthJ-C1 | IF=700mA x3 | | 0.2 | | °C/W |
Absolute Maximum Rating (Ta=25°C)
Parameter | Symbol | Conditions | Units |
Power Dissipation | PD | 110 | W |
Forward Current Note[1] | IF | 700 x3 | mA |
Forward Pulse Current (1/10 Duty Cycle, 400msec Pulse Width) | IFP | 1000 x3 | mA |
LED Junction Temperature | Tj | 125 | /°C |
Operating Temperature Range | Topr | -20ºC To +80ºC |
Storage Temperature Range | Tstg | -20ºC To +120ºC |
Soldering Condition Note[2] | Tsol | 180ºC For 5 Seconds |
Note: [1] .Independent electric power input by 12S(series)3P(parallel), see circuit structure diagram.
[2] When assembly on heatsink, low Temp. profile solder is suggested.
Optical & Electric Characteristics
.
.
.
365 - 375nm
390 - 420nm
.
.
.
Ordering Information
Color | Order Code | Peak Wavelength (nm) | Light Intensity (W/cm2 )@700mA x3 |
Min | Max | Min | Max |
UV | UVA-100-415D60 | 410 | 415 | 16 | 16 |
UVA-100-405D60 | 400 | 405 | 16 | 16 |
UVA-100-395D60 | 390 | 395 | 16 | 16 |
UVA-100-385D60 | 380 | 385 | 10 | 10 |
UVA-100-375D60 | 370 | 375 | 10 | 10 |
UVA-100-365D60 | 365 | 370 | 10 | 10 |
Color | Order Code | Peak Wavelength (nm) | Light Intensity (W/cm2 )@700mA x3 |
Min | Max | Min | Max |
UV | UVA-200-415D60 | 410 | 415 | 16 | 16 |
UVA-200-405D60 | 400 | 405 | 16 | 16 |
UVA-200-395D60 | 390 | 395 | 16 | 16 |
UVA-200-385D60 | 380 | 385 | 10 | 10 |
UVA-200-375D60 | 370 | 375 | 10 | 10 |
UVA-200-365D60 | 365 | 370 | 10 | 10 |
P.S.
- Caution !! Do not look directly at the UV light , and please wear safety Goggles.
Introduction of accessories
Back to top Page
Address:
4f., No. 4, Lane 26, Sinming St., Sindian, New Taipei, Taiwan(China)
Business Type:
Manufacturer/Factory
Business Range:
Chemicals, Electrical & Electronics, Health & Medicine, Industrial Equipment & Components, Instruments & Meters, Light Industry & Daily Use, Lights & Lighting, Manufacturing & Processing Machinery, Tools & Hardware
Company Introduction:
We, Chingtek Electronics Corp. Are the professional Hi-Tech company in Taiwan, and we provide best quality of services and products for our customers world wide.
We proves its ability in R&D successfully developed Industrial PC / LED products / UV formulator in the world. " Always do the best" is the highest principle and the vision of Chingtek team is to develop the most innovative and humanized products with ease of use, simple, and best performance.
A strong commitment to research and design means that our solutions are always at the cutting edge of technology and meeting customers needs
Our vision is to continue to utilize our industry experience and knowledge to expand the Chingtek solution range and further develop our global direct approach to provide exceptional value to retail and hospitality business around the world.