Turnkey Project For 6000BPH Complete Drinking Water Bottling Production Line
Flow Chart of Water Filling Production Line
1) driving system;
2) bottle-loading system;
3) bottle-rinsing system;
4) handing-over system between rinsing and filling;
5) filling system;
6) handing-over system between filling and capping;
7) capping system;
8) cap-unscrambling system;
9) bottle-unloading system;
11) electrical system.
- The rotary wheel is a fully stainless steel welded structure.
- The machine applies unique overturning bottle clamp, which is an innovation of our company. This bottle clamp grips bottle at neck position, avoiding bottle mouth thread contamination caused by rubber gripper block of a traditional bottle clamp. Made of SUS304 stainless steel, this bottle clamp is hygienic and durable.
- The high efficiency atomizing spay nozzle installed on bottle clamp is capable of cleaning any part of bottle inner wall, and also saves rinsing water.
- All sliding bushes of lifting device use Igus (Germany) anti-corrosion maintenance free bearing.
- The rinser is driven by driving system positioned inside machine frame via gear transmission.
- Transfer starwheel
- Made of stainless steel of superior quality.
- Equipped with bottle jam protection device.
- Rotary wheel fully made of stainless steel SUS 304.
- Gravity filling method.
- Filling valves are made of SUS316L.
- Filling valves are reasonably structured with accurate filling.
- Bottles go up and down in the function of cam through elevator, to process filling with contact to bottle-mouth.
- Level of cylinder is controlled with float-ball.
- Filler is driven through gears inside the machine frame.
- Link-wheels in rinser, filler and capper are transported in ringed support of bottle-neck.
Capper is the machine with highest precision, influence very much with the stability and reliability of the filling monoblock. Our capper features as follows:
The equipment is designed and used the technology of Arol from Italy, most advance technology in the world, developed with the experience of asepsis filling machine. For example, I) extruding wheel (main part to control the stability when sealing), uses the technology of Arol. Kinematical and kinetic design of the wheel by experts improves the stability and credibility of the equipment. II) Sealing faucet (main part to control the credibility of sealing), is improved by experts with the design of alnico. Besides the magnetic contortion variation device, there is variation dial which makes variation more easily. The benefit of this design is not only it can set the contortion, but also it makes contortion more precise and credible, and reduces inferior.
Cap distributing chute is equipped with reverse cap stop and reverse cap pick-out mechanism.
Cap distributing chute is equipped with a photocell switch to stop the capper when there is no cap inside the chute.
The capper is equipped with inlet bottle detection switch.
Centrifugal way of cap arranging is adopted to reduce damage of caps.
A cap inspecting system is applied to control on-off of elevator.
Machine List of Water Bottling Machine/Production Line
|Suitable bottle diameter(mm)||φ=50-100 H=170-330|
Q1:What's your guarantee or the warranty of the quality if we buy your machines?
A1:We offer you high quality machines with 1 year guarantee . we will give u spare part free in 1 year,
Life long after service. Mean while, our engineers go more than 50 countries for debugging, with rich experience.
Q2:When can I get my machine after I paid?
A3:We will deliver the machines on time as the date we agreed both side.
Q3:How can I install my machine when it arrives?
A3:We will send our engineer to your side as soon as you get all your machines ready , for testing
and teaching your technicians how to run the machines.
Q4:What's the delivery time?
A4:30-45 days after the T/T deposit or L/C.
Q5:What's min order quantity?
Welcome you to contact with me