| After-sales Service: | Online Video |
|---|---|
| Warranty: | 1year |
| Drive: | Electric |
| Principle: | Inhaled |
| Control: | Artificial |
| Layout: | Horizontal |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
| fault phenomenon | possible reason | Method of exclusion |
| Unclear vision when sandblasting | The sand is too fine | Use coarser sand |
| Filter plugging | Rapping filter | |
| low processing efficiency | The sand return pipe is blocked | Remove the sand return pipe and check the cause |
| The valve hole is too large | The aperture cannot be larger than 12.0mm | |
| air pressure too high | turn down the pressure | |
| The dust content in the sand is too high | Replace the sand | |
| Air pressure too low | Turn up the pressure | |
| too little sand | Add sand | |
| The dust content in the sand is too high | Replace the sand | |
| The position of the gun mount is not adjusted correctly | adjust it | |
| Spray gun machine spray gun and air nozzle are too small | Change to larger gun and nozzle | |
| Uneven or pulsating blasting | too little sand | Add sand |
| Sand return pipe blocked | clean it up | |
| Air pressure too low | Turn up the pressure | |
| Sandblasting line clogged | Air blockage | |
| clear blockages | ||
| Check whether the nozzle is normal | ||
| wet sand | Check for water in the air line | |
| sand change | ||
| Separator tank regulator air gap too small for abrasive output | air gap |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}