Test equipment is connected in series between the wire and the terminal blocks. This procedure is not only time consuming but violates the integrity of the system as proper re-termination can not be insured. Additionally, if multiple circuits are disconnected there is a possibility the wire will not be reconnected to the correct terminal block. When measuring/calibrating current loops, the typical method has been to shut down the system and remove the current loop wire at the terminal blocks.
We produce two type connection of test terminals, screw connect and spring one. The pricture is STK-6S, screw connection.
| ITEM NO. |
STK-6S |
| Order No. |
06011 |
| Dimension |
| Width x Thickness x Height (mm) |
66/8/48.5 |
| Screw (mm) |
M3.5 |
| Torque (Nm) |
0.8-1.6 |
| Stripping Length (mm) |
12 |
| Rated data |
| Voltage Rating (V) Current Rating (A) |
500V/41A |
| Power-frequency withstand voltage |
2.5KV |
| Wire section (mm² ) |
6 |
| Connecting capacity |
| Single wire |
0.5-10 |
| Multistrand wire |
1.5-10 |
| Multistrand wire with terminal |
0.5-6 |
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}