Terek Brand LPG Booster Pump Air Driven Argon Oxygen Gas Booster Pump

TEREK pump adopt aluminum alloy and stainless steel materials ,Gas boosters are suitable for the oil free compression of air and Industrial gases like Nitrogen, Helium as well as flammable and risk gases like hydrogen, oxygen and natural gas. GTB Series are single acting and single stage driven type. This series of pump driven piston diameter is 160 mm.
TEREK pumps are air driven pressure from 2 to 10bar (29 to 145 psi) by the normal air compressor. Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is reciprocating , The automatic reciprocating motion of the piston is controlled by a built-in four-way valve. Provide maximum operating pressure up to 80 M pa.
TEREK gas booster pump uses compressed air to drive large area end piston to small area end to get high pressure gas output.. Can be used for compressed air and other gas, the output pressure can be adjusted by inlet valve, Gas booster pump is suitable for compressed air, nitrogen, helium and argon gas, oxygen, hydrogen, methane, natural gas and other inert gas, Can pressurization most gases. The output can ensure gas is not contaminated. Automatic pressure maintaining. The pressure stability. Driven by gas, No spark or Flame and No generating heat, Can use it in dangerous places.

1.Compressed Air driven - no electricity required (connect to normal air compressor)
In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar
2.No airline lubricator required 
3. Hydrocarbon free-Separation between air drive and gas booster sections
4.Wide range of models with different ratios
5.Built-in-cooling unit inside each models 
6.Easy to install, operate and maintain
7. High quality seals, long life service available 
8. Gas drive, No heat,flame or spark risk and explosion proof 
9.Automatic pressure holding, whatever the cause of the pressure drop, the pump will automatically start, keep the loop pressure constant
10. All components of the contact with the gas are made of aluminum or stainless steel

Company Information

Shandong TEREK Manufacture & Trading Co.,LTD was established in 2000. TEREK Company focus on provide various kinds of pneumatic and hydraulic booster pumps, Safety valve test bench, booster systems and pressure solutions to the customers all over the world ,
With more than 18 years experiences in fluid pressure exchange and controlling field.Good quality products and perfect after-sale service have won us a good reputation and a lot of customers both at home and abroad.