| Type: | Bag Filter |
|---|---|
| Usage: | Environmental Protection, Chemical Industry, Water Treatment |
| Motive Force: | Pressure |
| Style: | Vertical |
| Performance: | Efficient Filtration |
| Certification: | CE, SGS |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Bag filter housing Working Principle
Bag filter is a widely used for liquid filtration,it can remove the particles of different size from liquid,in order to achieve liquid filtration,purification,separation,recovery purposes.It consists of three parts:bag housing,supporting basket and filter bags.According to flow rate,you may use multiple bags in a bag housing.First,the liquid enter into the housing from the inlet,which may placed in the side or on the top,and then flow into the filter bag which is braced by basket.Due to the impact pressure of fluid,the bag will extend and the liquid get evenly filtered through the bag and flow out of the outlet pipe.Impurities are trapped in the bag,the filtration process is complete.When you replace or clean the bag,just simply loosen the bolt,rotary hand wheel lifting the lid,and get the bag.
Bag filter housing Specifications
| Standard | GB, American Standard, German standard, Japanese standard, customized; single bag, parallel bag, multi-bag, cartridge |
| Models | Swing Bolt, Clamp, Flange, etc., |
| Rated flow | 1~960 tons / hour |
| Rated working pressure | 2, 4, 6, 10, kg / cm2 |
| Cylinder Material | 304 stainless steel (inside and outside blast or polished) or customized materials; |
| High-strength support basket | by uniform pore size of high-strength stainless steel mesh manufacture of 3.5mm; |
| Inlet and outlet | 1-14 inch or customized |
| Inlet and outlet Location | Side into and side out, side into and bottom out,top into and bottom out, top into and side out or customized |
| Interface Type | flange, screw thread or customized |
| Bag model | 180*410mm, 180*810mm, etc |
| Filtration precision | 1-800um (microns) relative or absolute precision |
| Seal ring material categories | general nitrile rubber, Teflon, nylon, Te Fulong acid such as high temperature and high-performance specialty materials |
| Type of bag | pure polypropylene, polyester, wool, viscose fiber, aromatic polyamide, Teflon, nylon and other materials |
| Structure of bag | single screen (surface filtration structure, pore size of 100 to 800 microns), needle felt cloth (three-dimensional structure of fluffy deep filter, pore size of 1 to 200 microns) and melt blown nonwovens (deep bed filtration structure, pore size of 1 to 100 microns) three, and there are a variety of ~ 800 micron filtration precision to choose from, in order to meet the requirements of different production processes. Acid, high temperature and other characteristics of the bag material can be adapted to different filtered liquid chemical compatibility requirements. |
Model |
Flow rate (T/H) |
inlet and outlet diameter |
Quantity of the bags |
Filter size |
Bag Specifications |
Filtration Area (M2) |
YL-1-219 |
20 | DN50mm | 1 |
219*410 |
180*410 |
0.23 |
YL-2-219 |
40 | DN65mm | 1 |
219*810 |
180*410 |
0.46 |
YL-2-400 |
50-80 | DN80mm | 2 |
400*810 |
180*810 | 0.92 |
YL-2-500 |
120 | DN100mm | 3 | 500*810 |
180*810 |
1.38 |
YL-2-550 |
140 | DN100mm | 4 |
5500*810 |
180*810 |
1.8 |
YL-2-600 |
150 | DN125mm | 4 |
600*810 |
180*810 |
1.8 |
YL-2-650 |
160 | DN125mm | 5 |
650*810 |
180*810 |
1.84 |
YL-2-750 |
200 | DN150mm | 6 |
750*810 |
180*810 |
2.3 |
YL-2-800 |
220 | DN100mm | 8 |
800*810 |
180*810 |
2.5 |
YL-2-850 |
240 | DN200mm | 9 |
850*810 |
180*810 |
2.76 |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}