The production line is designed for continuous high temperature fluorine plastic extrusion.
Barrel, screw, handpiece and molds are made of high-temperature corrosion-resistant materials. It is used for the production of conventional and special high-quality high-temperature insulated wire, and all kinds of computer and mobile phone communication wires.
Basic package consists of:
Active pay off rack→ tension control stand→ preheater→ straightening stand→30 high-temperature extruder→ imported handpiece→ main electric cabinet → movable thermostatic trough→ cooling trough →draught fan→ OD diameter measuring→ DC spark machine → double-wheel hauling machine→ wire storage rack → meter counter → biaxial take up
The machine is designed integratedly, all the equipments are installed on the platform, and the whole length is 9.6 m.
The main technical parameters:
1. Applicable for extruding PFA, FEP, ETFE and other fluorine plastic wire insulation
2. Applicable for insulated core wire diameter Φ0.15 ~ Φ1.5 mm
3. Main screw diameter Φ30mm
4. The aspect ratio L / D = 25/1
5. The production line speed 10 ~ 150 m / min
6. The screw speed 5 ~ 50rpm
7. Main motor INOVANCE servo motor 4.4kw
8. Hauling motor INOVANCE servo motor 1.3kw
9. Active pay-off motor 0.75 KW inverter
10. Biaxial take-up motor 0.75 KW inverter
11.Adjustable wire accumulator accumulator length is 80m
12. Cooling trough thermostat front , natural hydrocooling rear
13. Temperature measuring point of the machine: three parts of the main body with air cooling , the handpiece flange, handpiece clip, handpiece body, dies orifice.
14. All with high-temperature copper heater
15. Operating direction from left to right
16. Temperature control Japan intelligent RKC temperature controller