| Output Type: | Single |
|---|---|
| Warranty: | 2 Years |
| Output Power: | 350W |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 
Model Specification |
S-350-5 | S-350-12 | S-350-15 | S-350-24 |
|||||
DC Output voltage |
5V |
12V |
15V |
24V |
|||||
Output voltage range(Note:2) |
±2% |
±1% |
±1% |
±1% |
|||||
Output current range |
0~60A |
0~29A |
0~23.2A |
0~14.6A |
|||||
Wave and noise(Note:3) |
75mVp-p |
75mVp-p |
75mVp-p |
75mVp-p |
|||||
Inlet stability(Note:4) |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
|||||
Load stability(Note:5) |
±1% |
±0.5% |
±0.5% |
±0.5% |
|||||
Efficiency |
78% |
83% |
83% |
84% |
|||||
AC input voltage range |
85~132VAC/176~264VAC selected by switch 47~63Hz,248~370VDC |
||||||||
Input current |
6.5A/115V 4A/230V |
||||||||
AC Inrush current |
Cold-start current 25A/115V 50A/230V |
||||||||
Leakage current |
<3.5mA/240VAC |
||||||||
Overload protection |
105%-150% Type: pulsing hiccup shutdown Reset: auto recovery |
||||||||
Over-voltage protection |
5.75~6.75V |
13.8~16.2V |
18~21V |
27.6~32.4V |
|||||
Temperature coefficient |
±0.03%/ºC(0~50ºC) |
||||||||
Setup, rise, hold up time |
200ms, 100ms, 20ms |
||||||||
Vibration |
10~500Hz, 2G 10min,/1 cycle. Period for 60min,Each axes |
||||||||
Withstand voltage |
I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
||||||||
Isolation resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
||||||||
Working temperature and humidity |
-10ºC~+60ºC(Refer to output load derating curve),20%~90%RH |
||||||||
Store temperature and humidity |
-20ºC~+85ºC,10%~95%RH |
||||||||
Overall dimension |
215X115X50mm (L*W*H) |
||||||||
Weight |
0.90kgS |
||||||||
Note |
1. The parameter under the testing condition : 230vAC input ,rated load,25ºC70% RH. Temperature. 2. Tolerance the setting tolerance, circuit stability and load stability.(Note:5). 3. Wave test: adopting "A12"double wire for 20MHz, and 0.1 UF&47UF capacitor short-circuit for interrupting. 4. Inlet voltage stability test : the lowest voltage will be up to the highest voltage when the circuit overload. 5. Load stability test: The load is from 0% to 100%. |
||||||||
| 1. Prompt reply: Any inquiry or questions would be replied within 24 hours. |
| 2. Quality Product: Manufacture company, each of the products is tested and calibrated. |
| 3. Hospitality: Offer smiling service and your visiting is highly welcomed |
| 4. Fast delivery: delivery time is within 3-7 days usually, other occasion depends on the order qty. |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}