Silicone rubber for plastic toys pad printing applications
Silicone rubber for plastic toys pad printing is mainly applied in printing of irregular patterns on plastic toys, electroplating products, decorations, electronic toys, trademarks, etc.
Silicone rubber for plastic toys pad printing features
Silicone rubber for plastic toys pad printing is a carrier which transfers the patterns from the steel plate onto the products' surface. It has the advantage of good printing effects, fine quality, good resilience, and without any impurity.
Frequently asked questions of Silicone rubber for plastic toys pad printing
Why the printed pattern is incomplete or not clear
1. If the silicon pad is too hard while the pattern is very delicate or small, the printing patterns will be incomplete or not very clear, for in that way the silicon pad could not adsorb the printing ink from the steel plate well. If your pattern is very delicate or small, please use soft silicon pad for pad printing.
2. If the percentage of water in the ink is very high, the printing pattern also will be incomplete, and spot may appeared. For this situation, please clean your ink box, or change the printing ink or Tianna water.
Free Sample is Available .
If you have any more question about liquid silicone rubber ,please feel free to contact Monica as below:
For more information, pls contact with Ms monica at any time
Tel: +86 -0755-89212386
Anymore information about Silicone rubber for plastic toys pad printing please feel free to contact us at any
|Hardness (Shore A)|
|Tensile strength (MPa)||Tear-strength (kN/m)||Elongation (%)||Mixing ratio ( %)||Pot life(|
|Curing time (h)|