| Type: | Large range Ultrasonic Sensor |
|---|---|
| Output Signal Type: | Analog Type |
| Production Process: | Injection |
| Sensitivity: | High |
| Probe Type: | Dual Probe |
| Measuring Medium: | Solid |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
|
|
ITEM |
TEST CONDITION AND REQUIREMENT |
|
1 |
High Temperature |
After being placed in a chamber with 802ºC for 96 hours and then being placed in normal condition for 2 hours. |
|
2 |
Low Temperature |
After being Placed in a chamber with -302ºC for 96 hours and then being placed in normal condition for 2 hours. |
|
3 |
Humidity Test |
After being Placed in a chamber with 90-95% R.H. at 402ºC for 96 hours and then being placed in normal condition for 2 hours. |
|
4 |
Temperature Cycle |
The part shall be subjected to 5 cycles. One cycle shall be consist of: |
|
5 |
Drop Test |
Drop on a hard wood board of 4cm thick, any directions ,6 times, at the height of 75cm . |
|
6 |
Vibration Test |
After being applied vibration of amplitude of 1.5mm with 10 to 55 Hz band of vibration frequency to each of 3 perpendicular directions for 2 hours . |
|
7 |
Solderability |
Lead terminals are immersed in rosin for 5 seconds and then immersed in solder bath of +3005ºC for 31 seconds . |
|
8 |
Terminal Strength |
The force of 9.8N(1.0kg) is applied to each terminal in axial direction for 10 seconds. |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}