Linyi, Shandong, China
Business Type: Manufacturer/Factory
Lime Kiln Basic Parameter | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Number | Parameter | Units | 400T | 300T | 200T | 100T | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 | Inner diameter | Meter | 5.8 | 5.8 | 5.2 | 4.8 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2 | Outer diameter | Meter | 8 | 8 | 7.2 | 7 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3 | Effective height | Meter | 34.5 | 30 | 30 | 25.5 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4 | Kiln total height | Meter | 42.8 | 38.3 | 38.3 | 33.8 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5 | Blower | KW | 132 | 90 | 55 | 55 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6 | Total Power | KW | 263.5 | 221.5 | 186.5 | 186.5 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
7 | Efficient Power | KW | Main Features The calcination principle of composite firing shaft kiln is: mix the solid fuel (coke or anthracite) with qualified stone evenly, use rotary discharging device equipped on kiln roof to discharge the mixture into the kiln, then under its own gravity the mixture proceeds through preheating area, calcining area, cooling area, and finally calcined into qualified finished lime product. In calcining area, the heat produced by the coke and anthracite of the preheated mixture and the kiln bottom blasted secondary air which has been used to preheat the cold lime has made the temperature to reach up to 950 ~ 1200 °C, thus to complete lime calcination. Due to the add of auxiliary combustion-supporting duct, the temperature at each point is uniform, which ensures the even temperature of the kiln body. Lime kiln is a Thermal Equipment which is used for heating materials, like cement, copper Metallurgy, ferrous metallurgy, refractory material, chemical materials, paper making etc.
ADVANTAGES
COMPANY INFORMATION LINYI JINYONG KILN Co., Ltd( LINYI EAST KILN REASEARCH INSITITUTION ) is a large -scale kiln enterprise integrating desgin, manufacturing, installation, commissioning and service aintergration. Major furnace design, construction, technology transfer, etc. Our company is syndic unit of China Lime Association Council Uuit, Shandong environmental protection product accreditation unit. SPECIAL CHARACTERISTICS
OUR SERVICE
OTHER INFORMATION Delivery Time: within 20 days after received your 40% down payment. Warranty: One Year (Calculated from the goods arrived the destination port.) If any parts (excluding easily damaging parts) are found defective in quality in the first year, we shall replace it free-of-cost. After one year, parts can be replaced on favorable payment basis. We can send our engineer to provide the installation and trial run in your place. But the relevant cost shall be bear in your account (round trip air ticket, board and lodging). |