This product is a tire pulling machine specially designed for big cars. It adopts a three-way hydraulic system. It can be used when connected to electricity. It is fast. It only takes 1 minute to pull a tire, saving time and effort.
1. Three-way hydraulic system The operation is simple and clear.
2.Movable chuck for easy angle adjustment, can pull all 22.5 vacuum tires
3.Mechanical tire pressure lever, high pressure, easy separation of tires and steel rims, fast tire picking
Front four back eight
CMB car tires
1.Three-way hydraulic system with fast response speed and wide application range
2. Can pull out 22.5 vacuum tires, chuck tires, use labor and labor
3. The use of mechanical tire pressure, no harm to the tires and rims, to ensure the life of the tires and steel rims
1. First connect the machine to a 380V point source, and start the switch to ensure that the machine can work normally
2.Check if the tire frame is deformed before replacing the tire
3. Unscrew the air valve to release the tire air pressure, press the turn-down control switch, put the tire card down, put the tire on the chuck, fix the disc card, and control the switch to return the chuck to position.
4. Control the lowering switch, use the tire pressure lever to press the tire first, and press the rotation button to make the tire rotate for one week, and then press the tire completely
5. Use the tire hook and control switch to hook the tire. Turn the tire so that the tire is slowly hooked out along with the rotation. When the tire is all hooked out, stop turning and complete the tire removal.
6, tire installation, using a tire pressure rod, press on the tire, rotate the tire, and install the tire on the rim with rotation.
|This product is only suitable||for large vacuum tire R22.5|
|Cart tire with inner tube||10.00 means the tire section width 10in R means the radial tire|
20 means rim diameter 20in 1in = 2.54cm
|Applicable tire range||Vacuum tire 22.5|
Chuck tire 10.0r20
|Product size (length width height)||Product size (length width height)|
|product material||45 steel|
This product has been completely installed when it leaves the factory, and it can be used after being connected to the power supply. If you do not know our technology, you can also follow the instructions from the door to let you learn to use it.
Scope of application:
Suitable for cart repair factories, tire repair shops, disassembly of cart tires