The Cutter Suction Dredger of steel construction, the non self-propelled, dismountable type, is able to berth and dredge at any waters both in the coastal area and inland rivers, with similar conditions to that in navigation area "A" or below the "A"-line specified in code for inland river steel engineering ship manufacture of P. R. China.
The dredger can be used to excavate and transport cohesive sediment below the class III specified in code for dredging engineering construction technique issued by Ministry of Water Resources(MWR) of P. R. China.
The hull consists of three pontoons, one main pontoon (engine room), two side pontoons. All parts are dimensioned to allow the YS-CSD350 dredger to be transported by road, rail or water. The dredger is equipped with a rapid connection-disconnection system for the pontoons, achieved using bolts at deck level, hull front and rear, and hooks at the bottom. Further salient features of the dredger are the dredger is powered by a Marine engine. The main engine is to drive the dredge pump and hydraulic pump. Hydraulic pump will in turn power other all equipments such as cutter, swing and ladder winches, and the spud rams etc.
The hull is of all welded, steel construction to give the dredger the necessary strength required for dredging operations. The side pontoons are connected to the main pontoon by means of bolts.
The hull steel plate used is CCSB (shipbuilding steel plate ).
All of our products can be customized according to your actual needs and working conditions.
| No. |
Item |
Specification |
| 1 |
Total Length (with ladder raised) approx |
35m |
| 2 |
Length over pontoons |
25.00m |
| 3 |
Breadth |
7.2m |
| 4 |
Depth |
1.90m |
| 5 |
Main pontoon |
18.00m × 3.50m × 1.90m |
| 6 |
Side pontoon |
25.00m × 1.850m × 1.90m |
| 7 |
Mean draught with full bunkers approx |
1.3m |
| 8 |
Maximum standard dredging depth |
14.00m |
| 9 |
Dredge pump water flow capacity |
3000m3/h |
| 10 |
Standard discharge distance |
1500m |
| 11 |
Cut Width @ Maximum digging depth |
35m |
| 12 |
Cut Width @ Minimum digging depth |
44m |
Company Profile
Yongsheng Environmental Dredging Equipment Co., Ltd was established in 1990, is a professional manufacturer to develop sand dredging equipment, dredging equipment, dry ore magnetic separator, weed-cutting suction dredger, sand crusher and sand washing equipment. We have in total of 6 large manufacturing workshops and over 100 designers, engineers, and manufacturers to enable large production and efficient productivity. Our products have been sold to more than 80 countries and resigns. The enterprise has committed itself to develop new products and has introduced advanced technology from Germany, Australia, Japan, Holland etc. At the same time, the enterprise cooperatives with Jiangsu Ship Design Institute, Shanghai Ship Design Institute. Our products have been sold abroad such as Germany, Russia, India, Iran, Qatar, Libya, Saudi Arabia, Korea, Nigeria, Indonesia, Malaysia, the Philippines, Myanmar, Argentina, Namibia etc. And also China domestic enterprises such as China Railwa...
Certifications
){kind=link}
){kind=link}