Business Type: Manufacturer/Factory
Dongguan, Guangdong, China
|Inner chamber size |
|Exterior chamber size LxWxH(cm)||107x60x118||141x88x128||190x130x140||230x130x140||270x150x150|
|Volume of test Box||108L||270L||600L||800L||1440L|
|Volume of pressure|
|Instruction||A stands for standard press button type; B stands for touch screen type;|
|Temp. range||temp. of |
|NSS ACSS 35ºC±1ºC/ CASS 50ºC±1ºC|
|NSS ACSS 47ºC±1ºC/ CASS 63ºC±1ºC|
|temp. of |
|Conpressed air pressure|
| Spray volume|
|Salt water||5% NaCI solutions or adding 0.26g CuCI2 to 1L of 5% NaCI solutions|
|Exter./inner.Material||Imported gray PVC board Temperature resistance by 85ºC, transparent PVC cover; |
pressure bucket used SS304 with high pressure resistance and best insulation effect.
|System||Heating||Adopting direct heating mode, the heating speed is fast to reduce the Stand-by time. When the temperature reaches, automatically switch to the constant temperature state. |
The temperature is accurate and the power consumption is less. Pure titanium heating tube,
resistance acid and alkali corrosion, long service life.
|Controller||salinometer,fog collector, timer, sparying.|
|Defogging||Downtime clear test chamber salt spray, to prevent corrosive gas outflow |
damage laboratory precision instruments.
|Other components||Digital electronic control|
|safety protection device||1. When the water level is low, the power supply is automatically cut off, |
and the safety warning device is lighted.
|2. When the temperature is over, the heater power is automatically cut off, |
and the safety warning device is switched on.
|3. Salt water level is low, safety warning lamp lighting display device.|
|4. leakage protection function to prevent personal injury and instrument failure |
caused by line leakage or short circuit.