1. SGCC Regular HDG Galvanized Sheet Iron Plate/GL Steel Sheet for automobile plate simple introduction
It means that hot roll steel coils has gone through a chemical process to keep it from corroding,
so this protective metal, zinc layers, does not get rusty as easily. The coating also gives the
steel a more durable, hard to scratch finish.
2. SGCC Regular HDG Galvanized Sheet Iron Plate/GL Steel Sheet for automobile plate technical processing
1)Uncoiled and sheared
2)Cleaned using a caustic solution, which can remove oil/grease, dirt, and paint
3)Entry looper to revised and then annealing furnace
4)Steel is dipped into the molten zinc bath
5)Cooled in a quench tank to reduce its temperature
6)Post treatment and crimper
3. SGCC Regular HDG Galvanized Sheet Iron Plate/GL Steel Sheet for automobile plate quality control
Strict procurement process---skillful technical workers---final products inspection
(resistance to corrosion, salt spray test, exposure test, machinability, thermal resistance)
---standard packing
4. SGCC Regular HDG Galvanized Sheet Iron Plate/GL Steel Sheet for automobile plate advantages
1) Zinc coating has good adhesion
2) Resistant to corrosive factors
3) High strength&quality
4) Strict quality control system
5) Standard export sea-worthy packing
Standard |
Steel Grades |
Application |
GB/T 2518-2004 |
01 |
Common commercial application |
02 |
For mechanical engagement |
03 |
For stamping |
04 |
For deep drawing |
220,250,280,320,350 |
For structural components |
JIS G 3302-1998 |
SGCC |
Common application |
SGCD1 |
For stamping |
SGCD2 |
For deep drawing |
DIN EN 10142-2000 |
DX51D+Z |
For common application and mechanical engagement |
DX52D+Z |
For stamping |
DX53D+Z |
For deep drawing |
DIN EN 10147-2000 |
S220GD+Z |
For structural components |
S250GD+Z |
S280GD+Z |
S320GD+Z |
S350GD+Z |
product picture
product widely usage
Hot dip zinc coated steel sheet adapts in automobile industry
product test available
loading and packing