| Breaking Capacity: | Low Voltage Circuit Breakers |
|---|---|
| Operation: | Magnetic |
| Speed: | High-Speed Circuit Breaker |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Residual Current Circuit Breakers RCBO Electronic Type:
RCBO is applicable to electric circuits with rated voltage 230V AC, frequency 50/60Hz and rated current up to 40Amp. The RCBO provides indirect protection to the operator's body under such situation that the exposed live parts should be connected to a proper earth pole.
Specifications
| Sandard | IEC/EN61009-1 | ||
| Electrical features |
Mode | Electronic type | |
| Type(wave form of the earth leakage sensed) | A,AC | ||
| Thermo-magnetic release characteristic | B,C,D | ||
| Rated current In | A | 6,10,16,20,25,32A | |
| Poles | P | 1P+N | |
| Rated voltage Ue | V | AC 230 | |
| Rated Current : | 6,10,16,20,25,32A | ||
| Rated sensitivity I△n | A | 0.01,0.03,0.1,0.3,0.5 | |
| Rated residual making and breaking capacity I△m | A | 500 | |
| Rated short-circuit capacity lcn | A | 4500 | |
| Break time under I△n | S | ≤0.1 | |
| Rated impulsewithstand voltage(1.2/50)Uimp | V | 4000 | |
| Rated frequency | Hz | 50/60 | |
| Dielectric test voltage at ind.Freq for 1min | KV | 2 | |
| Insulation voltage Ui | V250 | ||
| Pollution degree | 2 | ||
| Mechanical features |
Electrical life | t | 4000 |
| Mechanical life | t | 10000 | |
| Fault current Indicator | YES | ||
| Protection degree | IP20 | ||
| Ambient temperature (with daily average ≤35ºC) |
ºC | -5~+40(Special application please refer to temperature compensation correction ) | |
| Storage temperature | ºC | -25~+70 | |
| Installation | Terminal connection type | Cable/U-type busbar/pin-type busbar | |
| Terminal size top/bottom for cable | mm2 | 25 | |
| AWG | 18-3 | ||
| Terminal size top/bottom for busbar | mm2 | 25 | |
| AWG | 18-3 | ||
| Mounting | On DIN rail EN 60715(35mm)by means of fast clip device | ||
| Connection | From top | ||
FAQ
Q 1. what's the payment term?
A. We accept TT,30% deposit and 70% balance agaisnt copy of BL
Q 2. how's the delivery time ?
A. usually it will take about 25 days for production
Q 3. tell me the standard of package?
A. Normally are cartons, but also we can pack it according to your requirement.
Q 4.Would you accept to use our logo ?
A.If you have good quantity,it absolute no problem to do OEM.
Q5. Can i take some samples?
A: Yes, we support to take samples before place the order. Just feel free to contact with us if you have any requirements.
Q6. Are you original Factory?
A: Yes, we have our own factory .
Q7. How can you make sure the quality of the products?
A: We will accord to international quality standards to inspect every item before leaving our factory.
Thanks for your reading.If any product meets your need.Welcome to send us an email.We are sure your any information can be attentioned without any delay.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}