1. Introduction
6110R-IN is a highly integrated module with low power 802.11b/g/n Wireless LAN(WLAN) network controller.
It combines an ARM-CM4 MCU, WLAN MAC, a 1T1R capable WLAN baseband, and RF function.
It also provides a bunch of configurable GPIO which are configured as digital peripherals for different applications and control usage.
6110R-IN integrates internal memories for complete Wi-Fi protocol functions.
6110R-IN integrates 512KB ROM to provide high access speed, low leakage memory.
The ROM memory clock speed is up to 125MHz.The ROM lib provides the following functions:
-Boot Code and MCU initialization.
-Default UART driver.
-Non-flash booting functions and drivers.
-Peripheral libs.
-Security functions libs.
2. Features
General
22.5 mm*13.0mm*3.25mm
CMOS MAC, Baseband PHY, and RF in the module for 802.11b/g/n compatible.
WLAN
Complete 802.11n solution for 2.4G band.
150Mbps receive PHY rate and 150Mbps transmit PHY rate using 40MHz bandwidth.
Built in 16Mbits Flash
Standards Supported
802.11b/g/n compatible WLAN
802.11e QoS Enhancement(WMM)
802.11i(WPA,WP2). Open, shared key, and pair-wise key authentication services.
Wi-Fi Direct support
Light Weight TCP/IP protocol
WLAN PHY Features
802.11n OFDM
One Transmit and one Receive path(1T1R)
20MHz and 40MHz bandwidth transmission
Short Guard Interval(400ns)
Maximum data rate 54Mbps in 802.11g and 150Mbps in 802.11n
Host Interface
1 high speed UART
1 I2C
6 PWM
1 ADC
GPIO
3. Block Diagram
4. Ordering Information
Part No.
|
Description
|
FG6110RINX-01
|
RTL8710BN, b/g/n, Wi-Fi, 1T1R, 13X22.5mm, SDIO+Uart+GPIO +I2C/PWM
PCB version V1.0, on board PCB antenna, shield cover V1.0
|
FG6110RINX-02
|
RTL8710BN, b/g/n, Wi-Fi, 1T1R, 13X22.5mm, SDIO+Uart+GPIO +I2C/PWM
PCB version V1.0, external antenna, shield cover V1.0
|