RGB LED Strip DC12V/24V LED Strip Controller RGB Amplifier
This Aluminum shell RGB amplifier is suitable for all kinds of constant voltage led RGB controller. It can enlarge the led controller signal through the RGB to receive the PWM(pulse width modulation),and output the signal to the load ,then it can make the same effect with the controller.when add each additional amplifier, can connect and controlled twice more LED lights.theoretically , one controller can connector with thousands of this RGB amplifier, and can make the same effect.
|Working temperature||-20-60 C|
|Connection mode||Common anode|
|Max. Output current||4A each channel|
|Max. Output power||144W|
1. To enhance the power and signal for connect more RGB led lights.
2. Adopt this aluminum led amplifier, you can connect and control another 10 meters led strips with 1 remote controller.Connection Diagram:
Connect the input and output wire in sequence according to the specification one the label of the amplifier, make sure that no short circuit phenomenon,then connect the amplifier to the DC12V/24V power supply , and used with the led light , the wiring diagram are as follows: