GFUVE Q8 high precision split core current clamp sensors
Applications
· Power quality measuring
· Large industrial loads
· HVAC
· Measuring around cable bundles
· Power load monitoring
· Waveform analysis
· Measurement range of 1mA to 10A AC
· Small, compact size
· Improved ergonomic design and easy operation
· Conforms to EN 61010, 600V CAT III
· Low phase shift for power measurement
· Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters
· With load capacity≤ 4
· Output model: Lead output (2.5m)
PARAMETERS
| Electrical parameters |
| Ratio |
1000: 1 or 2000:1 (customized) |
| Accuracy class |
0.2%, 0.5% |
| Primary current |
0 - 10A AC |
| Secondary current |
0 - 10mA AC (customized) |
| Max. Cont. Input current |
12 A |
| Load capacity |
≤4Ω |
| Over voltage category |
CAT III 600V |
| Output signal |
10mA AC at nominal input current |
| Frequency range |
40Hz-2000Hz |
| Dielectric strength |
3KV 50Hz/60Hz at 1minute |
| Temperature range |
-20°C to +55°C |
| Output |
2.5 meter cable with D01 connector |
| Max. voltage not insulated conductors |
600 V |
| Standard |
EN 61010-1, EN 61010-2-032 |
| Installation |
clamp type |
| Output mode |
lead output(2.5m) |
| Mechanical parameters |
| Dimensions (L x W x H) (mm) |
42.6× 122.5 × 23 |
| Weight (g) |
225 |
| Holding wire diameter (mm) |
φ8 |
| Max. jaw opening (mm) |
8 |
Audited Supplier 
){kind=link}
){kind=link}