| After-sales Service: | Free Part |
|---|---|
| Warranty: | 1 Year |
| Condition: | New |
| Certification: | ISO, CE |
| Application: | Home, Industrial, Commercial |
| Specification: | Normal, 300W to 1500 W |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
AL Solar AC DC Power System
300W 12V
AL Solar AC DC Power System is composed of inverter, solar charge controller and built-in battery, all in one. It can output the DC power and AC power. It is portable, easy operation and space saving. The three modes are the mains supply preferred mode, energy-saving mode, and battery preferred mode. Wide input range and AVR function keep the output voltage stable, even the input voltage changes unstably.
PWM charge mode and the independent solar three-stage charge management protect the battery and extend the using life. And there are overall automatic protection and alarms induding AC output overload protection . short arcuit protection . etc .
Digital LCD and LEDs for visualization of operation status of the equipment. Safe and reliable with intelligent exhaust fan control.
OEM/ODM ACCEPTED
Product display with different angles
Equipment appearance view
| 1.Inverter LCD display / operation interface | 8. Fan |
| 2.Solar input state indicator | 9.AC Output (Max. 10A) |
| 3.Battery mode indicator | 10. AC Charging Switch |
| 4.5VDC-USB,12VDC output indicator | 11.AC Input |
| 5. 5VDC-USB,12VDCoutput ON/OFF switch | 12.Battery Switch |
|
6.12VDC Output:12VDCoutput terminal |
13.Battery Extension |
| 7.5VDC Output:5VDC-USB output terminal | 14.Solar module input terminals |
|
15.Heat dissipation window |
This system uses PWM charging mode and the inner temperature sensor, whose charging efficiency is 3%-6% higher than non-PWM and increasing the utilization of time.
Ensuring the battery work in the best state, and greatly extend the using life of battery.
Easy Operation
1. First step: Connecting the solar panel into Solar panel interface correctly.
Connecting the external battery into the Battery Extension
(optional operation)
Connecting the AC Input
2.Second step: Connecting the load(light) into output ports correctly.
3.Third step: Turn on the"Battery Switch", "AC charging switch" and
"DC output switch.
The Solar input state indicator lights green.
The Battery mode indicator lights green.
The DC output indicator light yellow.
Tip: If this equipment is not used for a long without connecting solar panels, must turn off the "Battery(power) switch"
Make your life more wonderful!
You May Need...
OEM/ODM ACCEPTED
TECHNICAL DATA
| Mode: AL | 0.3kW/12V | 0.5kW/12V | 0.5kW/24V | 1kW/24v | 1.5kW/24V | |
| Inverter | Battery voltage | 12v | 24v | |||
| Built-in battery specification | 1*55Ah/12V | 2*55Ah/12V | 4*55Ah/12V | |||
| Rated power | 300W | 500W | 500W | 1000W | 1500W | |
| Output voltage | 110/220VAC | |||||
| Output frequency | 50/60HZ | |||||
| Output waveform | pure sine wave | |||||
| Charge by a mains supply | Rated voltage | 110/220V AC-*("*"mean an optional function) | ||||
| Charge current | 10A(maximum)-*(*means an optional function) | 10A (maximum)-*(*means an optional function) | ||||
| solar input | Maximum power | ≤25V | ≤50V | |||
| Voltage of overcharge protection | 10-25V | 20-50V | ||||
| Rated charge current | 30A | |||||
| Maximum power | 360Wp | 720Wp | ||||
| Voltage of overcharge protection | 14.2V | 28.4V | ||||
| Voltage of overcharge recovery | 14.0V | 28.0V | ||||
| Voltage of floating charge | 13.7V | 27.4V | ||||
| DC output | Voltage of high-voltage protection | 16V | 32V | |||
| Voltage of high voltage recovery | 15.2V | 30.4V | ||||
| Voltage of low voltage recovery | 12.6V | 25.2V | ||||
| Voltage of lower voltage protection | 11V | 22V | ||||
| 5V DC USB output port | 2one/max 2A | |||||
| 12V DC output port | 2 DC ports + backboard 12V terminal block (maximum 8A) | |||||
| Starting temperature of the exhaust fan | >45°C | |||||
| Ambient temperature for operation | 0 to 40°C | |||||
| Ambient temperature for storage | -25 to 55°C | |||||
| Operation/storage condition | 0-90% (no condensation) | |||||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}