Single Screw Extruder Pipe Machinery PE HDPE PPR Pipe Extrusion Production Line

It is mainly used to produce PE water pipe, gas pipe, drain pipe and so on.

Pipe Extrusion Single Screw Extruder
1.Siemens PLC control system  2.High efficiency special screw 3.Liquid channel: melt pressure is lower, melt temperature increasing slower 4.Solid channel: Channel depth changes with plasticizing process, 5.plasticized material overflow into liquid channel through the gap between screw dam flight and barrel. 6.Shearing and mixing zone: Highly mixing of residual solid scraps and melt material
Pipe Extrusion Die Head
1.Extrusion head with spiral structure, which can make sure the melt inside distributed evenly so as to achieve best plasticization.  2.Calibrator design with water ring which is easy to clean to achieve better cooling and then fast forming.
Pipe Extrusion Vacuum Calibration Tanks
Vacuum Calibration Tanks are used for calibrating and cooling pipes made of thermoplastic materials by means of spray cooling. The spray cooling method prevents the formation of water boundary layers and is more efficient in cooling than the full water tanks. Furthermore, there are no buoyancy problems that could distort the pipe. Spray-cooling increases the heat exchange rate significantly, compared to full-water-bath cooling. However, optionally all tanks can be supplied as full water tanks.
Options: 1.one or two chambers 2.Corrosion protected steel or stainless steel 3.Height adjustment, side adjustment 4.Many accessories available 5.Special length available 6.Central adjustment of support rollers 7.Many types of calibration sleeves 8.Size adjustable calibration sleeves 9.Covers made from aluminum or glass	Advantages: 1.Water temperature controlled by thermostatic valve, thus water consumption is kept low 2.Regulation of constant water level 3.Separate vacuum and cooling circuits 4.High efficient cooling system by big pumps and tubes 5.Full cone nozzles 6.Water flow control with floater 7.Longitudinal adjustment on tracks for better stability
Pipe Extrusion Haul-off Unit
Belt haul-off Belt haul-offs are used for continuous extraction of pipes and profiles. They are known for especially consistent performance even at high production speeds. The belts are driven by brushless AC servo drives. Both belt carriers can be mechanically or pneumatically adjusted in height. The belts can also be supplied with a cellular vulcanised or rubber layer.	Caterpillar haul-off Depending on pad type, dual caterpillar haul-offs can be used for pipes or profiles. Multiple caterpillar haul-offs are used for pipe take-off. The lower caterpillar carriers are adjusted manually, the upper caterpillar carriers are suspended and are pneumatically adjusted.
Extras 1.High-standard precision haul-o ffs driven via maintenance-free AC servo motors 2.Pressure adjustment for delicate tubes and profiles 3.Periodic wall thickening unit for pipes made of PVC 4.Remote control 5.V - shaped Haul-Off belts 6.Poly-V-belts 7.Electronic length measuring meter 8.Haul-Off-Saw combination 9.Start-up winch	Advantages: 1.Sturdy base frame 2.Easy operation 3.Belts can be changed easily 4.Good accessibility 5.Safety switches 6.Digital speed indication 7.Maintenance-free drives 8.Direct drives for every caterpillar track 9.Long contact surface 10.Pulling force is evenly distributed to product 11.Caterpillar can hold speeds within ± 0,01% 12.Quick-change system for padsavailablestandard
Pipe extrusion Cutting Machines
Cutting Saws Pneumatically activated radial saws suitable for cutting pipes and profiles. Easy operation of the saw on start-up of the extrusion line thanks to the possibility of raising the upper double pipe clamps. Clamping jaws according to the pipe diameter or profile shape guarantee an angular cut. Cutter Pneumatically or hydraulically activated cutting knife for burr-free cutting of pipes or profiles.	Servo cutter For chip and burr-free cutting by means of rotating knife. Advantages: Excellent accuracy of cut length Low energy consumption Low noise level by using special cutting tools and shielding the machine Cutting tools and enclosure of the machines Tools are easy to change

More details about our service:

The supplier provide service manual and maintenance instruction of main electric appliance ,limb , usage manual of equipment We also supply water,electricity,gas of equipment and installation drawing.

The supplier is responsible for installation,debug and training, we will realize guarantee of repair; replacement of substandard products within one year. After the machine leaves factory. Fittings of the machine will supply at preferential price after one year .
 

The seller will send one or two technician to the buyer'plant  to debugging,and the tickets ,eating ,transportation and visa fee will bepaid by the buyer.
 

If anyting intertst ,please contact us at  your best convenience,we can produce the overwhelming majority of plastic extrusion machines

Contact person:Jackie
 
 

Phone number:0086-13705422746