Business Type: Manufacturer/Factory
Xuzhou, Jiangsu, China
ZNW series Cylinder Wire Thickener can be used in the washing and dewatering of low con- sistency stock in paper making and pulping pro- cess. It works like a filter by gravity. The inlet consistency is around 0.5-1%, and outlet con- sistency is 4-6% based on different stock.
Its working principle is to dewater through the level difference between stock outside and inside of cylinder as well as press between press roll and cylinder.
As a main part of thickener, the cylinder con- sists of end spoke, middle spoke, filter wire and main shaft. The wire is made by steel plate with holes or UHMWPE plate covered with wires of different meshes.
It also have press roll and blade in the thicken- er. The press roll is driven by cylinder on the side plate, it is covered by rubber, the hardness of roll surface is 60-65 ° (Shore) . The pres- sure of press roll is adjusted by hand wheel. The press roll is equipped with blade, the blade is cling roll surface for peeling stock.
There are two points shall be pay attention when operation, one is to keep the stable stock level to avoid overflow and wire blocking, the other is that the tightened seal belt obstructs stock from thickening.
|Gravity Cylinder Thickener|
|Cylinder Wire Area (m2)||5||8||15||20||25||30||35||40||45|
|Cylinder Mould Size (mm)||Ø1000 x 1800||Ø1250 x 2000||Ø1500 x 3000||Ø1000 x 1800||Ø1000 x 1800||Ø2500 x 3800||Ø2500 x 4400||Ø3000 x 4000||Ø3000 x 4600|
|Inlet Consistency (%)||0.5-1||0.5-1||0.5-1||0.5-1||0.5-1||0.5-1||0.5-1||0.5-1||0.5-1|
|Outlet Consistency (%)||5-6||5-6||5-6||5-6||5-6||5-6||5-6||5-6||5-6|
|Motor Power (Kw)||4||5.5||7.5||11||11||11||15||18.5||18.5|
|How to make an inquiry ?|
|Method 1||Provide drawing to us.|
1. Capacity (ton/day)
2. Pulp raw material
3. With couch roll or without
|Method 3||If you don't clear about this product,you are welcome to contact with us.We are 24 hours online,will help you to choose the most suitable type.|