Product Description
The transformation of 4G/5G network construction mode and the improvement of radio frequency require a large number of small and micro base stations to ensure the transmission of information. The small and micro base stations need to supply power, and the optical cable connection between the optical cable and the remote module is specially used for small and micro base stations. The optic and electric hybrid distribution box comes into being.
The optic and electric hybrid distribution boxis used as the basic unit of the network physical layer in the 5G pre-transmission scenario, achieving higher speed, longer distance, wider temperature range and lower cost, fully meeting the 5G differentiation requirements.
Internal structure
1. The product light path is clearly marked, effectively avoiding the confusion caused by disassembly during maintenance.
2. The connector plug durability life> 1000 times.
3. The full radius of curvature control ensures that the radius of curvature of the fiber is greater than 30 mm at any position.
4. Flame retardant: meets FV-0 requirements.
5.Protection level: outdoor type ≥ IP55, indoor type ≥ IP53.
6.Integrated wiring function and lightning protection function in one box.
7. The box can supply the power and fiber optic signals for 1-12 RRU.
8. Installation method: wall hanging, pole hanging , or landing.
Cable end wiring module
1. Fiber optic connector: Standard SC/PC (SC/UPC) or standard FC/PC (FC/UPC).
2. Straight splice tray: At least 12-core, ABS material.
3. ODF terminal module: 12-core ODF terminal module, adapter type FC/SC as option, including 0.8m long 12-core pigtail.
4. Pigtail tray: enough space is reserved for cable termination of fiber optic cable terminals and pigtails.
Power distribution module
1. Surge Protective Device (SPD), in the base station without outdoor AC distribution box, the outdoor opto-electric integrated box can be configured with different nominal discharge current (60kA, 80kA, 100kA, 120kA) SPD according to user requirements, 1+1 protection mode (protection mode of LN, N-PE).
2. If the site is equipped with both an AC switch box and an AC power distribution box, the Surge Protective Device is installed in the switch box, and the AC power distribution box is no longer installed.
3. Smart meter, with NB-IOT function and RS485 standard interface.
4. The Surge Protective Device comply with the relevant provisions of the national standard YD/T 3007-2016.
Audited Supplier 
){kind=link}
){kind=link}