HVHIPOT Oil Filtration Machine (Single-stage) High Vacuum Transformer Oil Filtration Machine

Insulation oil purifier Oil Filtration equipment Vacuum filtration system transformer oil filtration machine

The machine GDZL-100L can effectively remove moisture, gas and impurities in the insulating oil, improve the pressure resistance of the oil and the quality of the oil, to ensure the safe operation of the power equipment. It is mainly used in the power sector and industrial and mining enterprises to deal with unqualified transformer oil, transformer oil, switch oil and so on.
 

Features

1. Small size and high efficiency, easy to move. It is especially suitable for live working on site. It also can dry the moisture of power equipment, and conveniently vacuum the power equipment.

2. Infrared liquid level automatic control device, system pressure automatic protection device and high-efficiency degassing components are adopted in the structure. The operation is convenient and safe.

3. The phase sequence protector is installed to protect the equipment motor from phase loss and low voltage operation. Make the device more secure.

Specifications

1. Capacity: 100L/min.
2. Working temperature: 0ºC~45ºC.
3. The altitude of the site will directly affect the vacuum of the machine. The higher the altitude, the lower the vacuum (negative value).
4. The oil to be treated should not be too dirty (that is, there are too many impurity particles in the oil), otherwise, it must be fully filtered with other filtering equipment to avoid affecting the degassing efficiency of the oil machine or blocking the filter elements and affecting the life of the oil machine.
5. When the vacuum pump is working, pay attention to the oil condition indicated by the oil mark (the oil should be on the oil mark line). When the water is much in the vacuum pump oil, the oil should be replaced in time.
6. When operation, if there is more water in the cooler, it should be released in time.
7. Always pay attention to the change of pressure gauge value. When the pressure is >0.3Mpa, the filter should be cleaned or the filter element replaced.
8. The filter screen of the primary filter, the secondary filter and the fine filter should be removed and cleaned frequently, and kept clean to avoid blockage, that resulting in insufficient oil or excessive pressure.
9. During operation, pay attention to whether the running noise of the pump and the corresponding motor is normal. If abnormal, it should be eliminated immediately.
10. When the machine is not in use, the residual oil in the oil machine should be put out for use.


Configuration Table