Permanent magnetic Eddy Current non-magnetic (non-ferrous )metal recovery/removal machine

 These concentric pole type eddy current separator designed to produce exceptionally high gauss at the belt's surface, with a large number of magnetic poles operating at higher rpms creates ultra high-frequency changes resulting superior separation of nonferrous metal scraps.

these powerful eddy current separator provides an economical solution to improve purity and exceotional product yield  without the need for additional expensive sensor based or optical sorting equipment.could e providing a cleaner product for further processing. This produces repelling forces which separate the metallics from non-metallics, Removal of the metallics(such as the aluminum , brass , bronze and copper )and product loss is minimized.  

Application of eddy currents light metal recycling machine 

1.For various of light metal recovery in various industries  

End-of-Life vehicle (ELVs) recycling industry

in End-of-Life domestic application

auto shredder residue(ASR)recycling

shredded and pre-treated co-mingle recyclables metal (Zorba) recycling industry

slags recycling that produced by waste incineration facilities 

steel slag scraps recycling industry

crushed Bulky city waste recycling

Aluminum alloy dross recovery from foundry sand in aluminum-shell-sand recycling lines.

non-ferrous recovery in Waste Electrical and Electronic Equipment(WEEE) recycling plants

non-ferrous scrap from crushed waste electrolytic capacitors

2.For harmful contamination light metal scraps removal . to improve the taste make sure material`s purification   

aluminum caps and rings removal from cullet in glass recycling   

aluminum separation in UPVC window recycling.

Brass rivets and hinges separation in timber recycling industry.

Mixed aluminum flakes separation in plastic recycling industry

fixed aluminum scraps separation from crushed rubber .

Working Principle of eddy currents non-ferrous metal revoval machine  :

An Eddy Current Separator consists of a short belt conveyor that has its drive located at the return end and a high speed magnetic rotor system installed at the discharge end. The magnetic rotor, which is positioned within a separately rotating non-metallic drum, revolves at around 3000 rpm during operation while the outer drum cover rotates at the speed of the Eddy Currents' belt conveyor. 

As the rotor spins at these high speeds, an electric current is induced into conducting metals. The induced electric current produces a magnetic field, which opposes the field created by the rotor, repelling the conducting metals over a pre-positioned splitter plate. The remaining materials such as plastics, glass and other dry recyclables will simply free-fall over the rotor, separating them from the repelled metals.

Important: When the waste(those that don't contain ferrous particles) travelling over the magnetic must be in a thin layer to allow the magnetic perform to its best, in case processed metal waste is mixed with ferrous metal. The Ideal format for any metal separation is first magnetic ferrous discharge, onto a vibration conveyor to spread out and further separate the remaining metals to allow the Eddy current magnetic to work at its optimal efficiency.

Specification of eccentric eddy current light metal recycling machine 

Suitable materials :

aluminum, brass, bronze, copper and other metallic separation from nonmetallic 

UBC(used drink metal cans) sorting	aluminum scrap recovery from molding sand	to Separate non-ferrous metals from wood waste

More Information About Ejet Magnet

This was in 2004, when our founder, Mr. Wang, first used magnetism knowledge to make research and designed the first set eccentric pole eddy current separator in China. Thus we are fully aware of this responsibility in sorting resources field for nonferrous metal.

In the year 2006, with 25 years of magnetic experience, Ejet Magnet was Established. Keeping improvement for all kinds of magnetic separators, to provide high-quality and high-performance products is our own responsibility, moreover, offering the best solution and the most effective service is one of the higher-standard targets we are pursuing. Ejet has a strict quality control system for raw materials inspection, producing quality inspection, and machine testing.

With 4 members team, in the beginning, Ejet has grown through continuous product innovation and worldwide expansion to over 5000 square feet of manufacturing space and more than 100 employees.

The main products eddy current separators, magnetic separators, sensor sorters and AI technology machines for recycling industries had been exported to more than 50 countries.

Materials testing and machines OEM could be available for better solutions for metal recycling, plastic, glass cullet, construction waste, incineration bottom ash, Aluminum, and E-waste recycling. Also for food, chemical, and lithium battery industries.

Ejet after-sales service promises that within 15 minutes we will make a response to the customer. On the condition that some problems cannot be solved by calls or call videos, engineers are available to serve overseas.

Each Perfect Separation is EJET's commitment to you! We constantly pay attention to your separation result.

Ejet had been focused on magnetic separator design, and manufacturing for more than 17 years with rich experience. Ejet has been dealing with the construction of machines for bulk material handling.

^Ejet® is a One-stop Source for Recycling Equipment used in Material Recovery Facilities, conveyors, Screening, and Magnetic Technology for all kinds of industry fields: Automotive Shredder Residue (ASR). Municipal Solid Waste. Incineration Bottom Ash. Mining Magnet.

 

17 YEARS FOCUS ON MAGNETIC SEPARATOR

Ejet had been in this field for 17 years since 2006. We are the leading manufacturer in Asia. with rich experience.

We had very good cooperation with famous universities, such as Shanghai Jiaotong University, Shanghai second technology University, Northeast University and scientific establishments.

 

20% ENGINEERS IN EJET OBTAIN MORE AND MORE NATIONAL PATENT

Engineers are accounted 20% of the total people in Ejet, the stable team keeps developing and perfect quality.

 

30 YEARS EXPERIENCE OF IN MACHINE DESIGNING

Some engineers had more than 30 years experience with magnetic separators and eddy current separators, we were the leading engineer for eddy current separators in China. Products are widely used in the recycling and mining industries.

 

3000 SETS PRODUCTS HAD BEEN MANUFACTURED

The products are widely used in mining, plastic recycling, metal recycling and E-waste recycling. And had been exported to more than 40 countries.

 

24 HOURS AFTER-SALES SERVICE

The contract is not the beginning of the cooperation, Ejet worries about what customers worry about. Customer service is 24 hours online.

And we had a spare parts store for each customer.

 

1.  Q: What kind of metal is the eddy current separator applied to?

A: Eddy Current Separator suitable for aluminum, copper, and brass.etc non-ferrous scraps separation from non-metal materials of size >3mm.

2.  Q: Which type should I use for my recycling plant?

A: In order to recommend the most suitable model, please let us know the material`s situation .including the composition, size, handling capacity and expected separation result.

3.  Q. What is the MOQ of your machine?

A: Our MOQ is 1 set

4.  Q: What are the pros and cons of a concentric pole rotor compared with and eccentric rotor design?

A: The eccentric type is much more suitable for the complicated material situation, The eccentric rotor design reduces long-term wear due to heated ferrous build up, and can effectively avoid the device damage caused by impurity ferrous metal.
Exclusive the ferrous influence, the concentric type has a little bit better separation effect but must make sure no ferrous exist.

5.  Q. How long is the machine warranty period?

A: the product warranty period is 12 months

For details, or for longer the machine Warranty Period.