Business Type: Manufacturer/Factory & Trading Company
New Design Short Cycle Hot Press Machine / Melamine Faced Board Hot Press
Hot Press Machine
Machine features: 1. The machine is widely used for hot-pressing lamination of melamine paper on density board, granular board and multilayer board. 2. The machine has independent power system and electrical system. It can realize manual adjustment and semi-automatic operation by using button centralized control. 3. The working pressure, time and temperature of the machine can be adjusted according to the process requirements. 4. Frame structure (integral) adopts high-quality steel plate welded frame structure with sufficient stiffness and strength. 5. NC machining of the whole frame ensures that the parallel accuracy is less than 0.1 mm and the flatness is less than 0.1 mm/m2 6.The press is equipped with synchronous connecting rod mechanism, positioning slides and other balancing mechanisms to ensure the smooth operation of the machine.
Hydraulic system: The system is a fast closed pressurization system with hydraulic overload protection device to prevent damage caused by ultra-high pressure.
Electric control system: The electric system is controlled by PLC and equipped with touch screen settings: plate thickness, time, pressure and temperature, etc. pressing process parameters, sending out relevant signals to control the press. Power line is three-phase four-wire system. The electric cabinet is equipped with leakage protection and ventilation measures; the electric control box is equipped with emergency stop switch; and the electrical system has complete line protection function.
Improvement features: Choose Italian phase servo motor oil pump fast hydraulic system,quiet and efficient, The closure time was less than 1.2 s and the compression time was less than 1 s. Full set of German Rexroth solenoid valve system. Optional split frame, widening and heightening, longer service life. The main cylinder adopts a special lengthened plunger cylinder, and the cylinder block is forged and formed in one time, thus eliminating the defects of sand holes (easy to leak oil) in the pouring cylinder block. The cylinder block has high strength and is not easy to crack. 1. Cylinder stroke: 250mm2. Seal ring: custom imported Y-type seal ring 3. Heat insulation plate: polymer heat insulation plate 4. Oil collecting plate: cooling, cooling, gathering residual liquid. Feed conveyor (servo fast type); belt conveyor, equipped with press roll and servo motor, complete a feeding time: <3 seconds (one in and one out), and ensure that each feeding position is the same and accurate. The front roll of the plate feeder is designed as a small diameter roller, which reduces the falling height of the base plate, and is equipped with cushioning slope to prevent paper breakage.
What services to offer: 1. Design and produce based upon your production need. Provide equipment placement foundation drawing 2. One year warranty for the machine. Liftetime after-sales service and maintenance. 3. Professional team for oversea machine installation&debugging. 4. Help train and guide machine operating.