Print This Page

Home Health & Medicine Dental Equipment & Supplies Dental Kit

Dental Lab Equipment Sealing Machine Medical Sterilizer Sealer Bag pictures & photos

Dental Lab Equipment Sealing Machine Medical Sterilizer Sealer Bag

Type:	Disinfect Equipment
Material:	PVC
Applicable Departments:	Orthodontic Department
Nature:	Specialized Instrument Equipment
Certification:	CE
OEM:	Yes

Samples:	US$ 130/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

Contact Supplier

Contact Now

Inquiry Basket

Foshan Vimel Dental Equipment Co., Ltd.

360° Virtual Tour

Diamond Member Since 2016

Suppliers with verified business licenses

Audited Supplier

Trading Company

Product Description

Company Info.

Basic Info.

Model NO.

WM-Sealla I

Voltage

110-220V, 50/60Hz

Power

900W

Pre-Heating Time

2-3 Minutes

Sealing Length

33mm(Max)

Sealing Width

8mm

Heat Preservation

Yes

Seal Duration

500*120*175 mm

Packing Size

4kg

Warranty

1 Year

Transport Package

Standard Export Carton

Specification

1set/CTN

Trademark

Vimel

Origin

China

HS Code

90184990

Production Capacity

5000PCS/Month

Product Description

Dental Lab Equipment Sealing Machine Medical Sterilizer Sealer Bag

Dental Sterilization Sealing Machine with CE

Model:
WM-Seal 20C, max sealing length is 22cm
WM-Seal 30C, max sealing length is 33cm

Technicals

WM-Sella I 20C / 30C
Power input	AC 110/220 V, 50/60Hz	Pre-heating time	2 - 3 minutes
Power output	900 W	Heat preservation	Yes
Seal width	8 mm	Dimensions (WLH)	500120175 mm
Seal length	22cm (20C) / 33 cm (30C)	Gross weight	4 KG

Feature

1. CE approved
2. 2. New concept of design
3. Economicl and practical
4. Designed to avoid cutting accidents

Sella I-30C is intended for sealing envelopes for steam sterilization.

Follow strictly the instructions from the manufacturer of your packages regarding their appropriate usage, cautions, conservation and storage.

a) Instructions

and adjust the timer according to thickness of the material to be sealed. Use a high-number for thicker material.
Important! In order to enhance the quality of the sealing, perform the resistance pre-heating. Press the sealer arm twice simulating the sealing without a package. This procedure may be performed only once before starting the sealing procedure itself but it should be repeated every time the equipment goes idle for longer than 1 minute.
Place the envelope on the sealing platform always with the paper side down (directly on the resistance) and the plastic side up and press the sealer arm down firmly. The heating time is controlled automatically after manual adjustment.
When the red LED goes off the sealing will be completed. Slide the blade to cut the envelope, raise the sealer arm and remove the package.

Note: In order to make the sealing better, wait for 1 or 2 seconds to release the sealer arm after the red LED goes off. If the heating time is too long or insufficient the sealing might be inefficient (the envelope may be stuck to the sealing area when it is pulled or be visibly badly-sealed). To correct this, adjust the timer properly. Once adjusted it is not necessary to perform any other adjustment to continue sealing.

b) Additional information

1.Keep the sealing platform always clean. The accumulation of waste on the sealing area will reduce the life cycle of the resistance and the insulating material. For an effective cleaning, wait for the sealing area to cool down and use a cloth slightly moistened with alcohol.

2. If the insulating material lower tape is worn the sealer may go faulty and the resistance may be damaged. Being so, every time the resistance is replaced, please also check the insulating material tape and replace it if it is worn.

3. If it is necessary to replace the resistance or the fuse, use only those which have the same specifications as the genuine parts.1)New concept of design; 2)Economicl and practical; 3)Designed to avoid cutting accidents and protect hands.

More details, please contact us.
Kathy