I Who We Are
Voice of Inspection is a German - based company established in HK and China in 2007 specializes in Quality Control. The aim of the services is to reduce and eliminate as many of the importing risks in accepting defective merchandise. Through on-site inspection, Voice of inspection monitors the correct fulfillment of the Purchase Order requirements and assure that the merchandise evaluated meets all specific requirements of the buyer.Being competitive in charges, Voice of Inspection is proud to have well qualified and experienced employees on board to deliver the best services to clients.
II Main Services
Quality Control Across China (Including HongKong & Macau)
Payment after inspection for long-term cooperation clients
III We provide professional inspection services in different stage of the production:
Quality Control Services-
Pre-Production Inspection (PPI)
During Production Inspection (DPI)
Final Random Inspection (FRI)
|Factory Aduit ||Helping you understand a supplier, Including supplier's|
capabilities,quality control system,management and operating procedures.
|Pre-production inspection ||Before production, helping you make sure the raw materials and|
components will meet your specifications and are available in quantities sufficient to meet the production schedule.
|During production inspection|
|Checking the products during the production process and trying our best to|
avoid some defects appearing, it can also help you check the product schedule
and conform that the products are ready when the time of shipment.
|Pre-shipment inspection (PSI)||It is a most effective inspection that confirms the whole shipment's quality level. It normally requires the production to be 100% complete and at least 80% of goods to be packed into cartons. The checked samples are randomly selected according to AQL standard. |
|Loading supervision ||It is an important step during the delivery process,|
It can make sure your products are correctly loading and reduce the possibility of breakage. Guaranteeing the good quality and condition of your products until you receive them.
|Electrical & Electronic ||Hard-Goods||Soft-Goods ||Industrial Products ||Others |
Light & Lighting
Telephone & Mobiles
Remote Control Toys
Health & Beauty Products
Furniture & Furnishing
Porcelian & Ceramics
Toys & Gifts
Clocks & Watches
Footwear & Leather
Luggage, Bags & Cases
Caps & Headwear
Tools & Equipment
Before you place an order to factory, we can examine the supplier's production capability, machinery, management and quality procedures, operations and processes. We can also brief the supplier regarding your quality requirements. Factory Evaluation ensures the appropriate suppliers are used and the client's quality specification is thoroughly understood.
We would design the program based on your requirements and focus. Basically, the areas covered in Factory Evaluation include:
-Scale & organization
-Quality control system
-Management and human resources
-Internal training & audit
-Raw material management
-House keeping & working condition
-Semi-finished and finished product management
Before actual production begins, we inspect raw materials and components. With the approved sample provided by you, we will counter check if the factory has ordered the correct raw materials, components and accessories for the ordered merchandise. To detect any potential defect, we will randomly select a number of semi-finished products for checking and report our findings to you for reference. Upon the end of Pre-Production Inspection, we will give technical advice to the factory in order to improve the product quality, so as to minimize the chance of having defects during actual production.
Fabric inspection focuses on fault/defect rate, color, end to end and edge to middle shading, hand/handle and appearance. The client will select the appropriate fault rate and standards to determine the acceptance of each shipment. This will minimize the quantity of panels or garments to be rejected caused by fabric faults, thereby ensuring the quality of the finished goods. Fabric inspection is also considered as preproduction inspection for garments or other textile products.
During Production Inspection
During Production Inspection is designed for shipment with substantial quantity; product line with continuous production; high requirement for on time shipment or unimpressive result was found during pre-production inspection. Normally, it will be carried out when 10-15% of goods are completed. We inspect the production batch and those products in the line for possible defects.
We identify deviations, if any, and provide advice on the corrective measures that are necessary to ensure a uniform batch of product with good quality. We will also re-check defects discovered in pre-production inspection and confirm if they have been rectified.
Final Random Inspection
Final Random Inspection commences when the merchandise is completed, i.e. at least 80% of products are ready and well packed. We check on safety, quantity, workmanship, function, color, size, packing, etc. to ensure the function and appearance of the products are consistent and satisfactory to the requirements and specifications defined by you.
For Loading Supervision, we monitor the loading process and check on quantity and proper handling of the cargos. The container(s) being witnessed will then be sealed. This service reduces the importation risk of your cargos.
IV Production On-site Check Workmanship Check 500 pieces/per day
Function Check: S-3
Contract Product Quality: all items
Conformity Check: all items
Quantity Verification: ALL
Inspection standard: ANSI/ASQ Z1.4, ISO2859 Special Inspection Level S-3
Basic inspection: Random sample check ≤500 pieces
V The quantity chart as below:
|Quantity check and sampling size |
(pcs or set/ctn)
|Actual Available Quantity (pcs or set/ctn)||Not Finished Qty|
(pcs or set/ctn)
(pcs or set/ctn)
|Packed ||Not Packed |
VI Our Services Covered Products:
Other products inspection service
- Electrical and Electronic Products Inspection Service
- Toys inspection service
- Apparel & Textile Inspection Service
- Machinery & Tool Inspection service
- Furniture inspection service
- Construction inspection service
What products can we inspect?
We have rich experiences in inspection field for nearly all kinds of consumer goods.
You can give us your specifications then we will give you our solutions.
All cities in the mainland, HongKong & Macau China
What we do during the quality inspection?
Preparation before inspection, including check all the documents and tools needed;
Visit the factory as scheduled;
Have an open meeting to explain the working procedure to the factory;
Sign anti-bribery letter;
Select a proper place for inspection;
To warehouse, account the shipment quantity;
Randomly draw some cartons for checking;
Check the order requirement/PO against the production sample;
Check against the approval sample if available;
Appearance/Workmanship check based on AQL;
Function and measurement check if required;
Package and shipping mark check;
Take digital photos of product and defects;
Draw representative sample (at least one) for record and/or to client if required;
Finish draft report and explain the findings to the factory;
When the report can be issued?
Receiving your reports with 24 hours after inspection.
How to pay?
Payment via Bank Transfer, PayPal, Western Union or made in china Escrow is acceptable.
Inspection cost always need to be prepaid before inspection.
Minimize supply chain risks through customized professional service.