MTU three phase 3300V/50Hz/1500rpm/2000kw containerized type diesel generator set
1.All generator set comply with international design and quality standards, such as ISO8528(GB/T2820-97), ISO3046,
BS.EN60034, BS5000, IEC34-1, GB755, VDE0530, CSA22-2, AS1359, and so on.
2.Engine and alternator coupled with the compact base of structure steel, equipped with exhaust silencer and radiator.
3.AVESPEED designed controller IS900 and multiple circuit breaker as a standard configuration for single unit.
4.One year limited warranty covers all systems and components.
>>Prime power(3B Application Group)
This rating is applicable for supplying electrical power in lieu of commercially purchased power. Variable load should not exceed a 75% average of the prime power, and this model can supply 10% over-load power for 1 hour in 12 hours.
>>Standby power(3D Application Group)
There rating should be applied where reliable utility power is available. A standby rated engine should be sized for a maximum of an 85% average load factor and 500 hours of operation per year. No overload capability is available for this rating.
All data is based on:
1. Engine operating with fuel system, water pump, lubricating oil pump, air cleaner and exhaust silencer; not included are battery charging alternator, fan, and optional driven components.
2. Engine operating with fuel corresponding to grade No. 2-D per ASTM D975.
3. ISO 3046, Part 1, Standard Reference Conditions of:
Barometric Pressure: 100 kPa (29.53 in Hg)
Air Temperature : 25 degree centigrade (77 ); Altitude:100 m (361 ft); Relative Humidity:30%;
Air Intake Restriction: 254 mm H2O (10 in H2 O);Exhaust Restriction : 51 mm Hg (2 in Hg).
4. Backed by worldwide service network.
N/A : Not Available;
TBD: To Be Determined;
Export wooden case (standard) or Plywood case (optional)
Specification of 2000KW Diesel Genset
|BASIC TECHNICAL DATA|
|Engine type||4-cycle,turbocharged and water charge air cooled, fuel-consumption optimized|
|Cylinder arrangement ||20cylinders,Vee 90°|
|Bore and stroke(mm)||170×210|
|Estimated total weight (dry)(kg) ||9640|
|Engine rated speed(rpm)||1500|
|Standby power(kW).gross ||2420|
|Combustion flow( m³/s ).rate ||2.6|
|Exhaust flow ( m³/s ).rate||6.8|
|Max. back pressure(mbar)||30|
|Exhaust noise unsilenced 1m(dBA)||117|
|Coolant capacity(only engine)(L) ||205|
|100% prime power(g/kwh)||195|
|75% prime power(g/kwh)||201|
|50% prime power(g/kwh)||213|
|Oil capacity, initial filling(L)||390|
|Engine control module||ADEC|
|High idling speed(rpm)||1700|