Mono-Block Condensing Unit / Refrigeration Unit

Mono-Block Condensing Unit / Refrigeration Unit
1.Product Description
Mono-block mini cold room condensing unit
1) With very compact structure
2) With TECUMSEH hermetic compressor or Danfoss brand compressor
3) With high-efficiency in-grooved copper tube and aluminum fin heat exchanger
4) With word famous brand refrigeration parts
5) Electronic boards are with functions of automic temperature set,control,and electric heater defrosting
6) Protection devices for over loading,over heating,lack of phase,high&low pressure,etc
7) Safe, easy, and low cost for installation and operation

2.Successful Case
Food wholesale market
Customer info:This project is for an food wholesaler.He feel hard and it's very costly to hire local engineers to install the cooling units.
So we advise monoblock refrigeration units, zero installation cost and barrier-free installation.
Order info: 17x10x3m cold room, 1/3m is freezer, 2/3 is chiller.
Wall mounted monoblock refrigeration units  (ESPA series, low temp design), hot gas defrosting

3.Detailed Parameter-mono-block condensing unit
4.FAQ
4.1 Does the technology of monoblock unit stable and mature?
Yes, monoblock unit has more than 100-years history.It is very common in Europe, Australia, America and etc.
Now monoblock unit is more and more popular as it is very easy to use and install.

4.2 Will monoblock unit make a big noise during working?
No, compared to semi-hermetic compressor, monoblock unit use hermetic compressor imported, and with box type design,
Can reduce the most noise.

4.3 How to handle the heat come out from monoblock unit stay indoors?
Please make sure the indoor have good ventilation;If it is no ventilation, we also can offer centrifugal monoblock unit,
Make centrifuge fan in the condenser with air hose, bring the heat to outside.

4.4 What should be take care when installing the monoblock unit?
It is very convenient on installation, compare to split type condensing unit, it no needs to connect copper pipe or others.
Just connect with the electric wire, and it's done.

4.5 What's the price of monoblock unit?
The monoblock unit price is little higher than split type, but it is very easy to install and save the space.
You can set up the monoblock unit by themselves within 1 hour, zero labor cost.

4.6 How you pack the panels to avoid the damage?
Our standard package:Plastic film package can protect the PU panels well, hard to tear.
FCL:Plastic film package;LCL:Plastic film package with wooden pallet.
Besides, we can also do the wooden packing if you need

4.7 How to calculate the electricity power of cold room?
If you use monoblock unit, the electricity power = input x hours
If you use split system, the electricity power = (Condensing unit input + evaporator input) x hours
In summer, hour is 18 hours.In winter, hour is 12 hour

5.  Installation instructions:
1) The unit should be fixed at the site where the air is easy to flow, and far away from heat source;
2) In the storage building, the fixing hole for the unit should be made before the installation. The side of the hole should be made of wood, strong enough to support the unit.
3) Good quality wood should be embedded at the hole for bold fixing;
4) Fix the unit on the body of the storage room with bolts;
5) Seal the hole around the unit with sealing material;
6) Drainage pipe fixing: Fix the drainage pipe on the drainage mouth of the evaporator with pipe clam, ensure the direction is correct and the water could flow smoothly;
7) Electrical system fixing:
(1)Check the conformity of voltage the main power supply to that of name plate, the tolerance is ±10%;
(2)Air switch is required to ensure safety and flexibility.
(3)Grounding must be reliable;
8)Trial operation of the unit
(1)Verify that the electrical connection is correct before start the unit;
(2)Add water to the pan of evaporator until there can be see water comes out from the of drainage pipe at the condenser side;
(3)Close the air switch, one minute later, the indicator of the fan and refrigeration on the control panel will be on, means the operation is normal. Keep watch until operation is stable.