SFP+ 10GE BIDI 20km 1270nm/1330nm Optical module SFP Transceiver
| Form Type |
SFP+ |
Max Data Rate |
10.3125Gbps |
| Wavelength |
1270nm/1330nm |
Max Cable Distance |
20km |
| Interface |
LC BIDI |
Optical Components |
DFB/PIN |
| Cable Type |
SMF |
DOM Support |
Yes |
| TX Power |
-6~1dBm |
Receiver Sensitivity |
< -14.0dBm |
Transmitter Operating Characteristic-Optical, Electrical |
| Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
Note |
| Centre Wavelength |
λC |
1250 |
1270 |
1290 |
nm |
|
| Spectral Width |
Δλ |
|
|
1 |
nm |
DFB |
| Side Mode Suppression Ratio |
SMSR |
30 |
- |
- |
dB |
|
| Laser Off Power |
Poff |
- |
- |
-30 |
dBm |
|
| Average Optical Power |
Pavg |
-6 |
- |
1 |
dBm |
|
| Extinction Ratio |
ER |
3.5 |
- |
- |
dB |
|
| Transmitter Dispersion Penalty |
TDP |
- |
- |
3.2 |
dB |
|
| Relative Intensity Noise |
RIN12OMA |
- |
- |
-128 |
dB/Hz |
|
| Optical Return Loss Tolerance |
ORLT |
- |
- |
12 |
dB |
|
| Operating Data Rate |
|
- |
10.3125 |
- |
Gbps |
|
| Optical Eye Mask |
Compliant with IEEE 802.3ae-2002 |
|
| Tx Input Diff. Voltage |
VI |
180 |
600 |
1000 |
mV |
|
| Tx Fault |
VoL |
-0.3 |
- |
0.4 |
V |
|
| VoH |
2.4 |
- |
Vcc+0.3 |
|
|
| Receiver Operating Characteristic-Optical, Electrical |
| Parameter |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Note |
| Center Wavelength |
λr |
1310 |
1330 |
1350 |
nm |
|
| Receive Sensitivity In Average Power |
Psen |
- |
- |
-14 |
dBm |
|
| Receiver Sensitivity In OMA |
|
- |
- |
-12.6 |
dBm |
Note1 |
| Stressed Receiver Sensitivity In OMA |
|
- |
- |
-10.3 |
dBm |
Note1 |
| Los Assert |
LosA |
-28 |
- |
|
dBm |
|
| Los Dessert |
LosD |
- |
- |
-20 |
dBm |
|
| Los Hysteresis |
LosH |
0.5 |
- |
6 |
dB |
|
| Overload |
Pin |
- |
- |
0.5 |
dBm |
|
| Receiver Reflectance |
|
- |
- |
-12 |
dB |
|
| Operating Data Rate |
- |
- |
10.3125 |
- |
Gbps |
|
| Rx Output Diff Voltage |
Vo |
300 |
600 |
1200 |
mV |
|
Notes:
[1] Receiver sensitivity is informative. Stressed receiver sensitivity shall be measured with conformance test signal for BER =1x 10-12 .
Overseas popular used our SFPs:
Packing and Shipping
Q&A
Q: What kinds of custom choices are offered in YXFiber?
A: As for customized transceivers, YXFiber offers regular custom choices such as compatibility, transmission distance, operating temperature, label pattern, label colors and etc. What's more, YXFiber welcomes any inquiry for customized products and solutions for all need and specifications.
Q: Why should I trust YXFiber compatible transceivers?
A: Besides the price advantage, we have compared to branded transceivers, YXFiber compatible transceivers also maintain the same performance and reliability. To satisfy our customers' needs of high performance, all of our transceivers are tested multiple times in mainstream original brand switches in our test center before shipped out.
Q: Can we use APC connectors on this?
A: Hi, as the default type is UPC, so it's only can be connected with UPC connectors. Thanks
Q: Once I place an order for my transceivers, how long will it take to receive them?
A: Normally you can receive the goods within 7 workdays
Q: Will using compatible optics in my equipment negatively affect my manufacturer's warranty?
A: No. Network equipment manufacturers do not require that you use only name-brand optics. In fact, when a product fault or defect occurs in the network, and the fault or defect is not attributable to the use of third-party optics, they will continue to provide support for the affected product under warranty or covered by their support program.
){kind=link}
){kind=link}