Parameter
Model | VGD-MB-RGBW ; |
Supply Voltage | DC12-24V ; |
Output | 4 channels ; |
Output Current | <4A/CH ; |
Output Power | 12V<192W , 24V <384W |
Static Power Consumption | <1W ; |
Connection Mode | Common Anode ; |
Working Temperature | -20ºC-60ºC |
Controller Size | 53*24*11mm(L*W*H); |
Net Weight | 45g |
Control Mode | APP Control |
Description
This Bluetooth RGBW Controller is a universal controller via ios & Android device. Bluetooth
4.0 and the most advanced PWM (pulse width modulation) control technology have been
adopted. 4 channels(Common anode) RGBW led lighting like Led strips light, LED module,
LED light box can be suitable with it. Easy to install and use, memory function, indicate light
show are the advantages of it. Modes selection, brightness & speed adjustment and more
are the nice functions. Dynamic mode like jump, fade or strobe, do it as you wish.
Connection
(1) It is necessary to ensure that the red arrow of the controller corresponds to the black arrow
at the device end, otherwise the device will have a short circuit.
(2) The connection between the controller and the power supply.
(3) Controller connection guidance
App Installation
Open QR Software then scan the below QR Code, then download & install it for free.
★Please contact us for detailed operation instructions
Attentions
1. Please use the product in a dry environment.
2. Please use the input voltage at 12-24V DC voltage, must not connect into 220V AC directly.
3. The product is requested common anode connection. The wrong connection
will cause a malfunction.
FAQ
1. Why the controller didn't appear in the Bluetooth list of phone setting?
In order to ensure that the controller cannot be connected by others, Bluetooth
controller won't appear in the setting list. Just open the APP with Bluetooth
enabled and the controller will show up.
2. Why the controllers didn't appear in the app after I opened the phone Bluetooth?
In order to ensure the privacy of the controller, the controller needs to be
successfully connected with the phone within one minute after powering on. If
more than one minute, please restart your controller.
3. How to reset your device?
If you experience any issues with your smart device, try following the steps
below to reset your devices and then add them back into your app.
Power the device off (8 seconds)
Power the device on (12 second)
Power the device off (8 seconds)
Power the device on (12 second)
Power the device off (8 seconds)
Power the device on (1 2second)
Power the device off (8 seconds)
Power the device on (8~12 second)
Power the device off (8 seconds)
Power the device on (8~12 second)
Power the device off (8 seconds)
Power the device on. If the light flashes 3 times and then change to 'bright up and
fade gradually' mode, it has been successfully reset.
Note:
1). Once you reset your devices, they will no longer appear in your app and will
need to be added again.
2). Make sure to perform the factory reset by switching on the power supply of the decvice instead of the APP.
4. Can multiple users control the same set of smart devices?
Yes. You and other people you share control with can log into the app on multiple
devices and control the same set of smart devices.
5. Can I log into the app on multiple devices?
Yes, you can install the app and log in using the same account on multiple
devices.