Mineral fiber board
Mineral Fiber Ceiling Tis a high grade construction decorationmaterial. These are renowned in the market as these offer advantages like sound absorption, excellent performance, fireproof, thermal insulation, sag resistant, mold-proof, energy-saving and environmental protection.Extensively used for indoor ceilings in corporate offices, airports, restaurants, petrol pumps and hotels, these are available in market at industry leading prices.
CE. EC certification
1. Dimension: 603× 603mm, 595× 595mm, 600× 1200mm or according to the customers'requirement
2. Thickness: 12mm, 13mm, 14mm, 15mm, 16mm, 18mm, 20mm
3. Bulk Density: 280-320/m3
4. Edge: Square, concealed, super concealed, tegular
5. Surface design: All kinds of patterns available
6. Data information:
| Materials |
Pore size
mm |
Perforated rate
% |
Bulk density
g/cm3 |
Moisture content
%≤ |
Thermal conductivity
W(m,K)≤ |
Fire resistance |
Radioactivity |
| high quality fiber,cement,quartz sand |
4,5,6,8,10 |
2.3-20 |
1.2-1.4 |
10 |
0.3 |
Incombustibility grade A(GB8624-A grade) |
Conforming to Gb6566-2001 A class |
Mineral fiber ceiling tiles Properties:
Decorative performance:Beautiful decorative patterns give space more flexibility.
Sound absorption:It can effectively reduce indoor noise and improve acoustical quality.
Excellent thermal insulating property.
Incombustibility:It is characterized by good fire-proof performance.
Mineral fiber ceiling tiles Applications:
Main hall,council chamber,office,theater,dining room,classroom,shopping center,
Machine room,airport,fitness center,library,swimming pool,living room,bedroom,
Subway platform,passageway,etc.
No Asbestos
Installation Steps
• Maximum brandering spacing is 500mm.
• Line brandering up, level or horizontal.
• PVC Ceilings panels can be screwed onto wood or steel brandering.
• Screw your PVC Ceiling panel onto the brandering, using a TS16 or SSDS16 PVCSA approved screw. The panels must lay in the same direction as the main trusses.
• For warranty purposes, ensure that only TS16 or SSDS16 screws are used.
• Ensure that spacing is allowed between the walls when installing ceilings, this will assist with movement during cold and warm conditions (expansion and contraction)
• Make sure the screw head is fastened properly and sits flush with the groove of the ceiling panel.
• Clip the second panel with the tongue into the groove of the first panel.
• Knock panel gently on the side to secure close fitment. (Use the palm of your hand) Do not carry on until the panel is fitted correctly.
• In order to fit the last panel, cut the panel in the length with a carpet knife.
• Finish off the installation with a PVC Cornice.
• Dust ceiling with a cloth after fitment is done.
More information, please contact us anytime.
){kind=link}
){kind=link}