Microwave Turmeric Red Chilli Powder Food Spices Meat Floss Dried Fruit Vegetable Sterilization Machine

Product description

The process time of the microwave sterilization equipment is much shorter than the traditional heating and sterilization time. It allows the food to be heated uniformly inside and outside at the same time. Generally, the preheating time required for the food to reach the sterilization temperature is not needed. Moreover, the factors of microwave sterilization are not just thermal factors There are also non-thermal effects. Therefore, according to the characteristics of microwave sterilization that is different from traditional heating sterilization, the following sterilization processes can be used.

Advantage
 

1, Intermittent microwave irradiation
  The advantage of the microwave intermittent irradiation method is that it can achieve a sterilization effect with a high electric field intensity in a short time. However, high electric field intensity and power density will place higher requirements on the breakdown resistance of microwave equipment and processed materials, such as the need for precision These requirements, such as controlling irradiation time, will increase the cost of microwave equipment.

2, continuous microwave irradiation

  In order to make up for the shortcomings of intermittent microwave irradiation, a continuous microwave irradiation sterilization process with a lower field strength and an appropriate extension of the microwave irradiation time can be used.
Generally speaking, the power density in the box of the tunnel box type microwave equipment is low, which can be suitable for the above process requirements. Under the premise that the material allows temperature and heating time (heat resistance), appropriately extending the irradiation time will help strengthen the sterilization effect, and at the same time, it can make the material heating state even, so there is enough time to make the material inside and outside with the help of heat conduction. Reduced temperature differences.

3, microwave multiple rapid irradiation and cooling
   The purpose of this sterilization process is to quickly change the ecological environment temperature of microorganisms and sterilize by microwave irradiation for many times, so as to avoid leaving the material continuously at a high temperature for a long time. Advantageously, the process is suitable for sterilization of temperature-sensitive liquids, such as sterilization and preservation of beverages and rice wine. The sterilization temperature conditions can be controlled by setting different sterilization objects.

Power capacity range: 10kw, 20kw, 30kw, ****~ 300kw
Capacity range: 50kg/h~2000 kg/h sterilization amount

Welcome to tell us your production information and hourly processing amount in your inquir

Detail of machine

1.chemical material,medicine tablet or pill,such as watered pills,water-honey bolus,honeyed bolus,condensed pill and Tibetan pill,etc.
2.all kinds of teas,herbs, flowers, green leaves,etc.
3.various dried meat, like beef, pork, chicken,duck, fish etc.
4.powder for various material,such as spices, other food additives.
5.agricultural products,such as china date,nuts,grains,peanut,etc.

6.snack food, fruit seeds, grains, peanuts, chips,etc.

Company information

We use international advanced scientific and technological indicators, monitoring and control equipment, to constantly optimize the excellence of microwave equipment details, combined with the excellence of equipment in various industries at home and abroad to enhance the comprehensive competitiveness of products.

Our company's motto is "sevice and quality are equally important".We dedicated to provide product design, the most practical, the most competitive and best quality and best sevice for you.

Our service

1). Free consultation service before, during, and after sales.
2). Free project planning and design services upon clients' special demands.
3). Debugging and inspecting of equipment until everything is functional before leaving the factory.
4). Overseas installation and training of equipment maintenance and operating personally.

FAQ

Q: How long is your delivery time?

A: Generally speaking, it is 7 days if the machines are in stock. Or it is 25 days if the goods are out of stock.

Q: Could you supply all the parameters about the machines?

A: Of couse. We are delighted to supply all the informtion that you want to know.

Q: How about the after sale service?

A:  We will send our engineers to your factory for installation and training. 

Q: How should I know the process of manufacturing if we pay the down payment?

A: We will supply you an exact delivery time as soon as we received your deposit. During the manufacturing, we will make reports for you to let you know the process.