This Producing Process Sketch As Below Picture:
This Profile Drawing As Below Picture:
General Parameter
| 1 |
Item |
Parameters |
| 2 |
Model NO. |
YX40-205-1025 |
| 3 |
Material |
Pre-painted galvanized sheet |
| 4 |
Thickness |
0.55-0.65 mm |
| 5 |
Yield Strength |
245 MPa |
| 6 |
Feed Width |
1250 mm |
| 7 |
Effective width |
1025 mm |
| 8 |
Roll Stages |
18 Stages |
| 9 |
Shafts Diameter |
∅75 mm |
| 10 |
Main Motor Power |
7.5 KW |
| 11 |
Hydraulic Group Power |
11 KW |
| 12 |
Forming speed: |
Approx. 3-4 m/min |
| 13 |
Electric Standard |
According to local voltage |
Machine Components
A. 5 Ton X 1250 Hydraulic Un-coiler-provided by the buyer themselves
B. Entry roller & Manual Pre-shearing device Un-powered
Smart cut control, to cut off the end of the final piece of sheet only
Working thickness up to 0.8mm
C. Cold Rolling Mills
Feeding section with guide
Gear/Sprocket driving;18-step to form;
New stand frame design
Rollers manufactured from 45#, CNC lathes, hard Chrome Coated
Shafts Diameter=ф75mm, Precision Machined
Main Motor=7.5KW
Forming speed: Approx. 3-4m/min (based on stair length 350mm, production length 6m)
Protection Mesh Cover (full mesh type) Above Roll-former To Avoid Hands Go Inside, slip type
D. Hydraulic Stair-Drawing & Cutting M/C
Stop to press, Stop to cut, Post cut, No Blanking cut
Cutting tool material: Cr12, Heat treatment
4- Pillars structure instead of old frame design
Stair depth=20mm
Hydraulic Group, Pump motor =11 KW
E. PLC Control System
Control the quantity, drawing length (300-400mm) & cutting length (min.800mm) automatically
Combined with: PLC, Touch Screen (Siemens), Inverter (Schneider),
Encoder (Omron), etc
Cut-to-length tolerance≤± 0.5 mm
CLOSED LOOP SYSTEM
Control voltage 24V
F. Product Rack Un-powered, 3 units
After-Sale Service
In correct operation & maintaining, the machine is guaranteed for one year since leaving our factory excludes the electric elements.
Installation:
If installation is needed, WE will dispatch a technician to the buyer's factory abroad to assist regulating the machine with charge free. The buyer should assist US to get the Chinese technician's visa and should pay for the roundtrip air ticket and the local accommodation.
If installation is needed, the buyer shall make the following preparation before arrival of technicians.
Terms Of Trade
1.Package & Shipment: Facility water-proof packing, Control cabinet packed in wooden packing.
2.Payment: 30%payment by T/T is required as deposit within a week since the contract signing date.70% payment by T/T is required before the machine be send out of factory.
Audited Supplier 
){kind=link}
){kind=link}