Product Description
MEGATRO RADIO TOWERS AND MAST
MEGATRO is the professional design and manufacturer for every type of Radio tower and mast. There are two types of radio tower, small and large. In general the large radio tower often located and install on mountain. Radio masts and towers are, typically, tall structures designed to support antennas (also known as aerials) for telecommunications and broadcasting, including television. They are among the tallest man-made structures.
Radio masts and towers also belong to telecom tower, which mailed used for broadcasting and television network system. MEGATRO can provide every type of radio mast and towers with different type and technical requirements. Radio masts and towers systems can accommodate a variety of disc with network parts.
There are many types of radio towers according to their shape and application. In general we often consider below some data during design
1 wind speed
2 tower loading
3 earthquake and terrain type
4 tower foot span and others
Among of our radio tower, some are bottom and top smaller section and middle section larger, sometimes it is guyed by stay wire to support total structure to stand extra loading.
General Design Criteria
Radio and Mast will be designed based on GB, BS 8100, TIA/EIA-222-G-2006, IS 802 & IS875 or equivalent international standards.
MEGATRO submit the complete data showing the drag factor from various angles of wind on the antenna offered.
Shape: lattice three-legs or four-legs towers or guyed three-legs or square towers or monopoles or Tapered slip-sleeve construction
Steel grades
Tower body: Chinese steel Q345B, which same to ASTM A572 GR50
Other webs, bracing and not stress plate and angle steel: Chinese Q235B, which same to ASTM A36
Plates: Chinese steel Q345B, which same to ASTM A572 GR50
Bolts: Chinese grade 6.8 and 8.8, which similar to ASTM A394
A) Dimension and tolerance for angle are according to GB/T1591-1994, similar to EN 10056-1/2
B) Hot DIP galvanization in accordance with GB/T 13912-2002, which similar to ASTM A 123
C) The welding will be performance in accordance with AWS D1.1 or CWB standard
Other information:
Heights up to 250'
Basic wind speed: The wind loading on the tower and antennas mounted on it will withstand a ground level wind velocity of 140 Km/h and survival speed of 180~200 Km/h or according to client requirements
Twist and sway: tower should be designed for a maximum combined twist & sway or as client requirements
Topographic category: according to client requirements
Importance factor: 1.5 for structure classification
Aviation painting: painting of the tower is required in areas/vicinity near an airport. The tower is to be painted it in accordance with the following:
Steel work is thoroughly cleaned of oil and dirt before applying the primer
Paint is applied in 3 layers, 1 primer coat and 2 top coats
Paint is all-weather lead free industrial type-approved by globe
If any special requirement, we can design and discuss with client.
Port of Loading: Qingdao Port
Lead Time: one month or based on the customer needs
Performance Standard
Besides conform to the drawing and design, the materials and fabrication of tower components shall conform to Chinese Standard or other international standard.
Payment: TT, LC
Origin: Shandong, china
Minimum Order: 1 set
Packaging: export standard package
Inspection: In house or their party inspection
Samples: Charge
Audited Supplier 
){kind=link}
){kind=link}