Medical Oxygen PSA Medical Oxygen Concentrator
We, Beijing Cape Golden Technology Company LTD., located in FangShan District, Beijing, China, one of the earliest manufacturers engaged in air separation technology research and development, specialized on design, product and installation.
Cape Golden relies on the technology advantage of Tsinghua University, Chinese Academy of Sciences and China Agricultural University. With more than ten years experience of air separation technology, now we could meet customers' different requirements in various fields, we always insist on providing economic, reliable, efficient and standard instruments and service. Our users are across more than 40 countries and regions. There have been thousand sets of our instruments operated normally till now.
Beijing Cape Golden Technology Company Limited is an international company specializing in global medical engineering. The company specializes in hospital operating room purification engineering, hospital isolation protection engineering, medical vacuum suction system and supporting ward door, bed, medical infusion rod, curtain and other projects. The products produced or processed by our company are flexible and diverse. Products are exported to Indonesia, Cambodia, Congo, Yemen, Australia, Ethiopia, Myanmar, Papua New Guinea. It has been widely favored by customers in the global market.
Cape-Golden adopts PSA principle to manufacture the medical oxygen PSA medical oxygen concentrator.
Under normal temperature and pressure, medical oxygen PSA medical oxygen concentrator could selectively adsorb nitrogen, carbon dioxide, water and other impurities in the air with PSA special molecular sieve, so as to obtain oxygen with high purity (93%~99%). After medical oxygen PSA medical oxygen concentrator entered the industrialization, the technology developed rapidly, the price and performance has a strong competitiveness, it is widely used in the medical, hospital, smelting, blast furnace oxygen enrichment, pulp bleaching, glass furnace, wastewater treatment and other fields.
As shown in the flow chart on the right.
The medical oxygen PSA medical oxygen concentrator is mainly constituted of air compressor, air cooler, air buffer tank, switching valve, adsorber and oxygen balance tank. After the dust particles are removed by the suction inlet filter, the raw air is pressurized to 3~ 4BARg by the air compressor and enters into adsorber. The adsorber take off the water, carbon dioxide and a small amount of other gas components by the activated alumina that was filled at the bottom of inlet, following the nitrogen is adsorbed by the zeolite molecular sieve filled on the top of the activated alumina. Oxygen (including argon) is the non-adsorbed component and will be vented from the top outlet of the adsorber to the oxygen balance tank. When the adsorber is adsorbed to a certain extent, the adsorber will reach saturation state. At this time, the absorbed water, carbon dioxide, nitrogen and a small amount of other gas components will be discharged into the air through emptying the switching valve, and the adsorbent is regenerated.
Each PSA adsorber alternates the following steps:
Adsorption -- Desorption -- Stamping
The above three basic process steps are automatically controlled by PLC and switching valve system.
Cape-Golden medical oxygen PSA medical oxygen concentrator has been designed to produce oxygen onsite and fill high pressure cylinders (up to 3000 psi), or to supply oxygen directly at up to 70 psi via tube, or do the both at same time.
For customers who require portability or desire to supply oxygen to others, the cylinder filling option allows for the filling of as few as 8-100s of cylinders per day at up to 2,200 psig (15,169 kPa or 151.6 barg). If a self-sufficient secondary oxygen supply is needed, cost-efficient oxygen compressors designed to fill cylinders intermittently are available.
For larger hospitals with central piping, Cape-Golden stationary medical oxygen PSA medical oxygen concentrator with capacities up to 5,500 SCFH (144.6 Nm³/hr or 2,596 LPM) at 72.5 psig (500 kPa or 5.0 barg) are available as single train, duplex, or skidded turnkey systems. All series systems are designed to deliver oxygen that meets the United States and European Pharmacopoeia Oxygen 93%(93% ±3%) Monograph and fully assembled and tested in Cape-Golden facilities. Unskidded, high purity (99% ±0.5%), containerized, and cylinder refilling options are available upon customer request.
No space inside a hospital building? We can supply you with a containerized unit, which can be installed outside near to where you need oxygen. We manufacture our containerized units in-house, meaning we are responsible for every single step taken when building the system. Whether you want a basic Medical Oxygen Generating System or a more sophisticated unit, we can design and manufacture it according to your requirements and needs.
Any Cape-Golden medical oxygen PSA medical oxygen concentrator can be fitted with other customer-specified or Cape-Golden recommended components to form complete Medical Oxygen Supply Systems, including automatic switch-over. In the unlikely event that the system deviates from preset limits, the automatic switch-over immediately switches to the secondary oxygen supply. System alarms alert the health care facility of the condition so that corrective service may be performed.
Along with the oxygen generator, we also supply the entire system for a complete solution.
|Flow rate:||1 m3 / h to 500 m3 / h|
|Purity:||93% to 99%|
|Operating temperature:||5 ° C - 45 ° C|
• Control system with SIEMENS color touch panel
• Molecular sieve moisture protection
• Automatic start / stop
• Built in purity analyzer for continuous monitoring
• Reliable - built for uninterrupted operation
• Designed for dynamic pressure loading
• Stainless Steel Robust Design Piping (AISI316)
• Data logging (saved on memory card)
• Audio / visual alarm
• Purity control
• Meets Worldwide Medical Oxygen Grade Standards
• Cost Saving of up-to 80% from Liquid/Cylinder supply
• Dependable Highest Reliability with Energy Efficiency
• Compact design with Easy and simple controls
• Pre-piped systems for Easy and simple installation
• Automatic operation-one touch start up and shut down
• Easily Partial Load Opeation in variable Demand Flows
• Ready to use upon delivery
• Optional HMI Touchscreen
• Optional Remote Control or GSM Interface
• Easy to maintain with Continuously monitored Purity & Flow
• Optional Cylinder filling Ramp with Emergency Disaster Recovery
Cape-Golden medical oxygen PSA medical oxygen concentrator systems can be fabricated in accordance with all relevant local codes (e.g., ASME, ANSI, NEMA, CSA, CRN, CE/PED, TSG R0004-2009, HTM2022, ISO 9001, ISO 13485, ISO 10083, and USPXXII Medical Oxygen Standards).