Product Description
24V2A Smart Car Battery Charger for 24V LiFePo4 Battery Charger
Lithium battery charger /Battery charger VRLA Battery Charger Electric Scooter Charger Lifepo4 Battery Car battery charger Car Battery Charger 12V Battery Chargers Solar Charger Solar Battery 12v battery chargers Car Battery Power Adapter Battery Chargers Charger Battery 24v battery charger Power Supply Portable Charger Chargers battery Lithium battery charger 12 volt Battery charger 18650 battery charger Battery charger 12V 12V6A battery charger
| Specification |
| Input: 100~240V |
| Output: 24V 2.0A |
| Charge Process: CC(pre-charge)-CC(bulk)-CV-cutoff |
| Charger Indicator: With 20%~100% 4 LEDs Battery Meter |
| Output Protections: Short-circuit, Reverse Polarity... |
| Safety Approval: CE cUL Approved |
| Size: 170 x 71 x 41mm (plastic) |
Suit for Battery: 38.4 Volt (12Cells) 2~12Ah LiFePo4 Battery Charger
|
Product Features:
1.With short circuit, overload, over voltage protection function
2.With automatic capture, tracking battery voltage, automatic identification of positive and negative pole, lock the charge current, temperature rise sensing, the buck stops.
3.Fit for: E-bike,E-motorcycle, electronic scooter, Electronic balance car and so on.
3.Charging state:TWO LED display.
4. Solid shell with fine workmanship
The shell is made of high temperature, wear-resistant, impact resistant ABS+PC composite material. It can effectively improve the heat dissipation and ensure that the temperature of the power supply is not excessive
5. Smart cooling hole with fan design
That can effectively improve the heat dissipation of the power source, so that the charger can be kept in the proper humidity and temperature, and effectively prolong the service life of the charger.
General Specification for G100-36F
Input Voltage: AC 100~240V 50/60Hz
100-240VAC, 50-60Hz |
Input Current: Max. 1.6A
Max. 1.6A |
| Output |
G100-12F |
| C.V |
14.4V |
| C.C |
5.0A |
| Operating |
-20ºC~40ºC |
| Cooling |
No fan designing, natural convection. Do not cover the charger. |
| Charge process |
Auto 4 stages: Pre-CC-CV-Cutoff
Cut-off when charge finished. |
| Battery |
38.4V 12 Cell LiFePo4 Battery-pack. |
| Size |
170 x 70 x 51mm |
| Enclosure |
ABS+PC Plastic housing, inlet type C8 or C14 |
| Weight |
400g |
How to use:
1.Connect the AC cord to the socket, The "power" lamp will light on solid.
2.Connect positive charger clip (red) to positive battery terminal, the black clip to negative. (You can use other dc plugs to connect battery), the "25%~100%" lamps will light on flowing. If the battery polarity reversed or output shorted, "Warning" lamp will flashing, please check the setup.
3.Depend on the charged capacity, 25%~100% lamps will lights up solid sequence, until the battery is fully charged. Then you can power off the charger and disconnect the battery or you can charge a new battery if you need.
An example shows the duration of 80% state charged for an empty battery.
| Battery capacity |
G100-24L |
| 3.2Ah |
1.5 hours |
| 7.0Ah |
3 hours |
| 12Ah |
5 hours |
| 25Ah |
10 hours
|
| Our Services |
| 1.Low MOQ |
It can meet your business very well, 100pcs. |
| 2.OEM Accepted |
Please send us your requirements or design. |
| 3.Good Service |
We treat clients as friends, always welcome to visit our factory |
| 4.Good Quality |
BLV is an original manufacture ,100% tested in production test one by one before shipping |
| 5.Fast & Cheap Delivery |
We have big discount from forwarder (long Contract) |
Audited Supplier 
){kind=link}
){kind=link}