1. This line is mainly used for recycling the waste PET bottle, PET container etc.
2. To separate PET bottles to flakes from label, cap, oil, garbage.
3. This line is composed of separator, crusher, cold & hot washing system, dewatering, drying, packing system, etc.
4. Easy to operate, Full automatic.
Capacity: 300-3000kg per hour
Moisture of PET Flakes: Less than 1.5%
Cap &Label: Separate with the PET bottle flakes automatically.
Bottle Types: PET Bottle, Plastic Bucket, Water Bottle, Coke Bottle...etc
Application: PET Strap, PET Yarn Fiber, PET Sheet
|1||Belt Conveyor||Bottles conveying|
|2||Bottle Label Remover||Remove above 90% labels for both common and compressed bottle; No flakes waste and no water consumption|
|3||Manual Sorting Belt||Manually sort out PVC bottle, labels, and other impurities|
|4||Belt Conveyor||Bottle conveyor tp crusher|
|5||PSJ1200 Crusher||Bottle crushing into flakes|
|6||Horizontal Screw Loader||Conveying flakes to next screw loader|
|7||Screw Loader||PET flakes conveying|
|8||Floating Washer||Wash flakes and remove floating materials as PP, PE and Caustic soda|
|9||Low Speed Friction Washer||Remove sand, mud and dirty|
|10||Hot Washer||After hot washing, it's easier to remove oil, glue|
|11||Screw Loader||PET flakes conveying|
|12||Hot Washer||After hot washing, it's easier to remove oil, glue|
|13||Screw Loader||PET flakes conveying|
|14||High Speed Friction Washer||Remove the glue and dirty|
|15||Screw Loader||PET flakes conveying|
|16&17||Floating Washer||Wash flakes and remove floating material as PP, PE and Caustic Soda|
|18||Spray Washer||Remove the Caustic Soda|
|19||Centrifugal Dryer||Drying and flakes moisture reach 2%|
|20||Pipeline Dryer||Hot air drying, moisture <1%|
|21||Label Flake Separator||Remove little amount of label and dust in PET flakes|
|22||Packaging System||Storage silo for PET flakes|
|23||Electric Cabinet||Electric control for the complete line, can be customized|
Transport PET bottle into rolling separator
Motor power 2.2 kw, with inverter control. Length of belt:4500 mm Width: 800 mm Install isolation stick against-slide on the
surface of belt. Adjust height of conveying belt freely. Small moving wheels are flexible and convenient.
Effectively remove labels on the bottle surface.
Motor power 18.5 kw Blower motor 3 kw* 2 Length of the shaft 4000 mm The diameter of the shaft 600 mm Ratio for label removing
80%-90%for pressing bottle 90%-95%for non- pressing bottle
Shredder & Crusher
Divide large-size raw materials into relatively uniform small-size raw materials through shredding and crushing
Crushing bottle to small flakes.
High Speed Friction Washer
Preliminarily remove stains and save the amount of hot water.
Motor power: 37 kw Rotary speed of screw:2200 RPM Material for contact with PET flake Stainless steel 304 The machine inside with
water spray system. With a water tank to collect waste water. The paddle inside the friction washer
Hot washing tank
high temperature and the presence of chemicals, remove oil stains and other dirty things that are difficult to clean.
Pot diameter φ1800mm Stirring motor power 7.5 kw Heating way Electricity or steam heating Height 2100 mm Material for contact with PET flake Stainless steel 304 With one set of water collecting tank , collect the floating plastic material, such as PVC label, PE caps...etc Water after water treatment can be recycled use, the sieve made of stainless steel 304.
Motor power of screw loader 3 kw, with inverter control. Motor power of roller: 2.2 kw Quantity of roller: 2 sets Tank dimension: 3.9m(L)*1.2m(W)*2m(H) Material for contact with PET flake Stainless steel 304 A and platform will be provided for you to inspect the inside of the floating water tank.
Most of the water on the surface of bottle flakes is removed by centrifugal force, dehydration rate above 95%.
Removing the remaining label and dust in PET flakes.
Automatic butterfly valve :1.5 kw Air blower:4 kw Material for contact with PET flake Stainless steel 304
Pipe dry machine
With hot air to dry the bottle flakes.
Intelligent Control System
all parameters can be set on the touch screen. 1.Electric control component
2.All electrical units: LS, ABB.
Q1: Are you manufacturer or trade company?
A1: We are a professional manufacturer for producing machinery over 10 years, We can provide customized service.
Q2: What can i buy from you?
A2: Plastic crusher, Plastic Washing Recycling Line, Plastic Pelletizing Recycling Line, Pet Bottle Recycling Line, Plastic Squeezing Machine, Plastic Pipe/ Profile Extrusion Line and other customized services.
Q3: How is the quality of your product?
A3: Our products are manufactured according to national and international standard, and we have a test on every machine before delivery.
Q4: How about the price?
A4: We are a professional manufacturer and be able to provide you with the lowest price than market one. Please contact with us in time, and we will give you the best quotation.
Q5: What if the machine is damaged?
A5: One year warranty and all-round after-sales service.
Q6: What basic terms can you accept?
A6: Accepted Delivery Terms: FOB, CFR, CIF, EXW
Accepted Payment Currency: USD, EUR, CNY
Accepted Payment Type: T/T, L/C.