Maintenance of shaping machine BC6066 Horizontal shaping machine
Product main features
The shaper is mainly used for forming plane, planning medium on the work piece surface and groove in small batch production.
1. Shaper workbench can about rotational angle worktable with transverse and elevating the rapid moving mechanism; to planning inclined plane, thereby expanding the scope of use.
Feed system using 2 planer cam mechanism, there are 10 levels of feed. Change the amount of knife, it is also very convenient.
3. Shaper in knife system overload safety device is installed, when due to careless handling or by external influence and cutting overload when, take the knife itself slipping, nondestructive parts which guarantees the machine to normal operation.
4. The sliding pillow and bed rails and with speed gear pair and the main rail sliding surface, lubrication oil pump has played for circulating lubrication.
5. The shaper is provided with a clutch and brake mechanism, so in the transform speed, start and stop machine, do not have to cut off the power supply, the parking brake mechanism can made the ram when the clutch is disengaged the inertial stroke volume is not more than 10 mm.
|Maximum shaping length||mm||630||660|
|Maximum distance from ram bottom to table surface||mm||385|
|Maximum moving distance of the working table(horizontal)|
|Maximum moving distance of the working table (vertical)||mm||360|
|Table size (L*W)||mm||630×400|
|Travel of tool head ||mm||120|
|Number of ram reciprocating per minute|| ||14,20,28,40,56,80|
|Tool carrier rotary angle||°||±60°|
|Maximum size of tool planer(W*T)||mm||20×30|
|Feeding range of level travel(12steps)||mm||0.2~2.5|
|Feeding range of vertical travel(12steps)||mm||0.08~1.00|
|Main motor power ||KW||3|
Tengzhou Luzhong Machine Tool Co.,Ltd
24 Hours service can be available at any time .