Shenzhen, Guangdong, China
Member Since: 2008
Business Type: Manufacturer/Factory & Trading Company
liquid RTV skin safe silicon rubber for film makeup mask making
Descriptions of liquid RTV skin safe silicon rubber for film makeup mask making :
Liquid rtv skin safe silicone rubber is generally named two-components silicone
rubber, Part A and part B. It features an exceptional fluidity and good operability.
The mixing ratio is 1:1,mainly be suitable for making molds application.
Applications of liquid rtv skin safe silicon rubber for robert making
Liquid skin safe silicone rubber could be mainly used for food mold , such as chocolate mold , cake mold , it is also used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding .
It can also be used to make sex doll , sex toy , mask , artificial limbs etc.
Application of liquid translusent Silicone for insoles silicone foot gel silicone sheets
1. shoe sole,toys, gifts,human replica mold making
2. decoration, plate engrave,art crafts mold making
3. resin crafts, unsaturated resin crafts mold making
4. poly resin crafts, candle crafts, plastic crafts mold making
5. stationeries, plaster crafts, Bunddhist statue crafts, etc mold making
-low shrinkage (less than 0.1% )
-high tensile and tear strength with high copy times
-easy for operation (mixing ratio at 1:1 /10:1)
-good fluidity easy for pouring operation ( in round 10000 cps )
-it is food grade with FDA
Operating time ( Mins 25C)
Curing time ( Hrs 25C)
Tear-strength (KN/m )
Operation instruction of silicone rubber :
1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .
4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3
minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly
down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(detergent or soap water) on
7. Pour the vacuumed mixture into the model frame from the side of the mold frame .
More information , pls feel free to contact Ms Melantha: