ROLL FORMING MACHINE FOR YX25-200-1000 TILE ROOF PROFILE
Material:Color steel sheet or AluminumParameters
|1||Material||Color steel sheet or Aluminum|
|2||Thickness||0.4mm-0.6mm,Up to Max. 0.8mm (if thickness > 0.8mm, then hydraulic pre-shearing device or electric pre-shearing device instead )|
|5||Max. Line Speed Of Roll Former||Approx. 4m/min (stair length 350mm, production length 6m)|
|6||Roll Stages||18 stages|
|7||Material of forming roller||45# steel, CNC lathes, Hard Chrome Coated|
|8|| Shafts Diameter||Φ75 mm|
|9||Main Motor Power|
7.5KW with reducer
|10||Hydraulic Group Power||11KW|
|11||Electric Standard||380V /50Hz/3pH or as the customer's requirements|
a. 5Ton*600mm manual un-coiler one set
Un-powered; Load capacity= MAX.5Ton
Coil Width= MAX.600mm
b. Entry roller one set(Feeding section with guide)&PRE-LEVELING DEVICE
The In-feed Section of the machine allows for variations in sheet width
Pre-Level Device with 4 over 3 shafts to remove the Coil-set
c. COLD ROLLING MILLS
The feeding section with guide; Gear/Sprocket driving, 18-step to form
Frame stand Construction,H beam base,with leveling bolts in the base to
Adjust the level; with ruler
Rollers manufactured from Cr12, Heat Treatment.
Shaft Diameter=Φ75mm, Precision Machined, heat Treatment
d.PLC Control System
Control the quantity, punching position & cutting Length automatically, and setting parameters for auto web/flank size changing
Cut-to-length for post-cut
Combined with: PLC, Touch Screen(SIEMENS), Inverter (SCHNEIDER), Encoder (Omron), etc
Closed Loop control
Cut-to-length tolerance≤±1 mm
Control Voltage 24V
(Remote control adopted)
After-Sale Service Package & Shipment: Facility water-proof packing, Control cabinet packed in wooden packing.
In correct operation & maintaining, the machine is guaranteed for one year since leaving our factory excludes the electric elements.
If installation is needed, WE will dispatch a technician to the buyer's factory abroad to assist regulating the machine with charge free.
The buyer should assist US to get the Chinese technician's visa and should pay for the roundtrip air ticket and the local accommodation.
If installation is needed, the buyer shall make the following preparation before arrival of technicians.
Terms Of Trade
Payment: 30%payment by T/T is required as deposit within a week since the contract signing date.70% payment by T/T is required before
the machine be send out of factory.