Basic Info.
Species
Die Cutting and Creasing Machine
Placing Form of Template
Camber
Die Cutting Tool
Steel Blade
Computerized
Computerized
Application
Paper Packaging Materials
Transport Package
Plastic
Specification
1200 1400 1600
Product Description
model no: ms-b
type: fully automatic
use: carton making production line
voltage: 3ph 380/440v
feeding type: lead edge
brand: maosheng
Automatic High Speed 4 color printing rotary die cutter machine.
Main mechanical characteristics:(photos are for reference only) This product can be used for monochrome printing of paperboard at one time,printing slotting rotary die cutting .Chain feed machine ,Main engine frequency conversion control.The transmission gear is made of 45# steel helical gear,Spray lubrication,The main drive gear and drive shaft are connected by tightening and free key connection,The absence of amplification,Cancel the center wear,Register accuracy for printing machine to maintain long life;The whole machine adopts electric separation,Pneumatic locking,Single close combination,The machine has exquisite printing patterns,Easy to use and maintain,The degree of automation is higher. ITEMS | Explain |
1 Machine clutch | - Clutch alarm with electric control machine,Continuous ringing warning on the move,Ensure the safety of the operators.
- Pneumatic interlocking device.
- Main motor starting protection device,The whole machine is not locked,The host cannot run.
|
2 feeding pross | - The outer diameter of the upper feeding roller is 86mm,thick wall steel tube,Match four outer diameters. 124mm paper feed ring.
2)The outer diameter of the lower feeding roller is 120mm,Hard chromium plating by embossing. 3)Manual adjustment of feed roller clearance dial,The range of adjustment is 1.2 ~ 12mm. |
()Printing Department ITEMS | Explain |
1applicator roll (Printing Roller) | - The outer diameter is 480mm(Outer diameter of plate).
- The first group of 200 lines
- Hard chromium plating on steel tube surface
- Make balance correction and run smoothly
|
2 Printing press roll | - The outer diameter is 124mm, Wall thickness 18mm.
- Surface grinding of steel tube,Hard chromium plating.
- Balancing correction,It runs smoothly
- The manual adjustment range of the printing roller gap is adjusted from 1.2 to 12mm.
|
3 Top and bottom rolls of paper feeding | - top roll:Outside diameter is 86mm thick wall steel pipe,Match four outer diameters. 124mm paper feed ring.
- lower roll:Outside diameter is 124mm thick wall steel pipe,Surface grinding,Hard chromium plating.
- Manual adjustment of feed roller clearance dial,The range of adjustment is 1.2 ~ 12mm.
|
4 Steel anilox roller | - The outer diameter is 180mm.Wall thickness 25mm.
- Surface grinding of steel tube,Pressed reticulation,Hard chromium plating.
- Balancing correction,It runs smoothly.
- Air pressure automatic lifting device matched with paper feeding system(When the paper is fed, the anilox roll drops and the plate contacts,When the paper is stopped feeding, the anilox roll rises and the plate is separated).
- Anilox roller with wedge type overrunning clutch,Ink blending,Wash ink is convenient and quick
|
6 rubber roller | - The outer diameter is 180 0.02mm.place of production jizhou
- Wear resistant rubber on the surface of steel pipe,And balance correction is done
- High and medium grinding of rubber,Ink transmission effect is good.
|
7 phase adjust system | - Planetary gear structure.
- The printing phase adopts electric digital display phase.
|
8 Ink cycle | - Pneumatic diaphragm pump,Ink supply stability,Operation and maintenance is simple
- Ink filter screen,Filter impurity,Separation of ink and wash.
|
9 Printing phase
fixing device | - Cylinder type automatic brake device
- When the machine phase is separated or adjusted,Brake mechanism limit machine rotation,Keep the original gear position fixed point.
|
ROTARY DIE CUTTER UNIT Heading | |
1Die roll | - Outer diameter 430 m (excl. cutting die)
- 45 coil steel surface grinding, hard chromium plating.
- Balance correction to increase operational stability
- Tool die fixed screw hole spacing 100mm × 75mm
- Applicable tool height 25.4mm
- Thickness of wood formwork: 16mm (for three-layer board) 13mm (for five-layer board)
|
2Top roll | - Outer diameter 434.2mm
- 45 coil steel surface grinding, hard chromium plating.
- Balance correction to increase operational stability
- Manually adjust the clearance with the die roll.
- The pad is 10 mm thick and 250 mm wide.
- Superior adhesive adopts Taiwan super-resistant high-quality products. It is removable and interchangeable. It can quickly replace new superior glue and restore die cutting precision.
- Detachable force glue automatic grinding device, the excellent force rubber wheel linear speed has the function of automatic compensation, after excellent force glue grinding linear speed automatic compensation, in order to maintain the accuracy of each batch of cartons.
- Mechanical transverse 40mm swimming device
|
2Phase adjustment mechanism | - Planetary gear structure adopts cylinder cushioned rubber wheel feed paper.
- The die-tangent phase adopts the planetary differential structure, and the digital display control is adjusted 360 °. (operation, stop can be adjusted)
|
Main technical parameters: ITEMS | Company | 468×2500 TYPE |
Max printing area | mm | 1400×2200 |
Minimum Processing size | mm | 400×400 |
Printing plate thickness | mm | 6 |
Cardboard thickness | mm | 2~10 |
mechanical speed | sheets/min | 60 |
economic speed | sheets/min | 30-50 |
Main motor power | KW | 4.0 |
Precision of process printing | mm | ±0.5 |
Slotting accuracy | mm | ±1 |
Motor and electrical detail name | Place of Origin | SPECIFICATION | Number |
main motor | Hebe | 4.0Kw converter motor | 1 |
bearing | Harbin | whole | |
electrical equipmen | siemens | whole | |
clutch | Xianyang | whole | |
air cylinder | Zhejiang | whole | |
diaphragm pump | Wuhan | whole | |
gear [rack | Local | 45# | |
ALPHA INVERTER | Shenzhen | Power 4.0Kw | |
Address:
Dongguang County Hebei Province, Cangzhou, Hebei, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Manufacturing & Processing Machinery
Company Introduction:
Our company is specialized in different kinds of products. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we make our products with good quality at the reasonable price.