| Certification: | ISO9000, CCC, TS16949, EPA, EEC, RoHS, CE |
|---|---|
| Transmission Type: | Manual |
| Emission Standard: | State four |
| Displacement: | 8 |
| Payload: | 30T |
| Fuel: | Diesel |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
| Mixing Capacity | 12CBM |
| Geometrical capacity (m³) | 20.5 |
| Body thickness of cover / middle / rear(mm) | 8\6\6 |
| Concrete charging speed (m³/ min) | 3 |
| Concrete discharging speed (m³/ min) | 2 |
| Tank rolling speed (r/min) | 0~14 |
| Discharging residual ratio (%) | <0.9 |
| Water Tank Capacity (L) | 440 |
| Model/Brand/Origin of hydraulic pump | 089 / ARK / Italy |
| Model/Brand/Origin of hydraulic motor | 090 / ARK / Italy |
| Model/Brand/Origin of reductor | P75S / TOPUNION / Italy |
| Other | With diesel engine |
| Recommended Wheelbase of chassis | 6x4:4000mm+1350mm 8x4:1800mm+3200mm+1350mm |
| Color | according to the customer's request |
| TIP: Regarding the direction of the turning(please face to it), dip angle, relative position and size of the PTO flangedisc.please you have to let your customer supply us,or the body will not work because of the wrong match. Since the PTO flange for each type of the chassis maybe different even the same Brand.There are two flange discs-one is on the transmission shaft,the other is on the PTO mouth.If you need us to supply the transmission shaft,please you have to ask your customer supply the above information to us,or you can let your customer buy locally. |
| TIP: Regarding L2 size,please you have to let your customer supply us,since we must design the transmission shaftaccording to L2 size(we have not found it on the drawings).As for the L1,L3,we can calculate them approximately,but can not be exact,since the sizes marked on the drawings are not the amplification of the same proportion when we enlarge it.So if your customer can measure it for us,it'svery helpful for us to design the good matched body. |
| TIP: Please it's better for you to ask your customer if their engine is the EFI throttle of the engine.If not, we should supply the matched accessories accordingly.Or please just let your customer to take the photos of it,our engineer can judge it from the photo. |
| TIP: Please it's better for you to ask your customer to take more photos of the chassis,it's very helpful for us to design and make the body.And then you can save more trouble when your customer install the body. |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}