Emergency Truck Jump Starter with Electric Jack +Air Inflator (3 in 1)
Item No.: JS-EP96
Selling point:
Electric jack+ air inflator+ car jump starter(3 in 1)
Main functions:
Product highlights:
12000mAh Big capacity
12V 400 Amps jump start engine size up to 4.0gasoline
Built-in air inflator
Built-in electric jack
Quick charge input,charging time<3 hours
ABS housing in V0 Anti-fire grade
12V10A Supply power for 12V devices
Reverse -charge Protection: No reverse charging back to CarKu unit After the vehicle started.
Reverse Polarity Protection: No damage happened while the clamps are connected in wrong
terminals.
Short-Circuit Protection: Prevent short-circuit occuring while two clamps are connected.
Over-discharge Protection: Effectively prevent over-discharge of the battery in the jump starter.
Over-charge Protection: Effectively prevent over-charge of the battery in the jump starter.
Over-temperature Protection: Automatically stop working when the temperature is getting too
high.
Jump starter Product Specification
Battery Capacity |
12000mAh (44.4Wh) |
size |
389*226*154.5mm |
weight |
5600g |
Input |
Quick Charge(5V/2.4A,9V/2A) |
Output |
12V 10A(12V car electronic products) |
Jump Starter |
12V |
Start Current |
200A |
Peak Current |
400A |
Operating Temp. |
-20ºC~60ºC |
Lifetime |
>1000cycles |
Full charging time |
3 hours |
start engine displacement |
Diesel:2.5L, gasoline:4.0L |
Air inflator Specification
Operating voltage |
DC 12V |
Max pressure |
150PSI |
Max current |
10A |
Flow |
35L/min |
Length of air hose |
0.65m |
Jack Specification
Rated power |
150W |
Operating voltage |
12V |
Max current |
13A |
Max loading(car weight) |
3T |
Height Range |
135-365mm/155-450mm |
Product details:
Product accessories:
Jump Start Vehicle Instruction:
1.Make sure that the numbers of indicators is not less than 3 ones.
2.Connect the RED clamp to the vehicle's battery positive (+) terminal and connect the BALCK clamp to the vehicle's battery
negative (-) terminal.
3.Start the vehicle.
4.When the vehicle is started, remove the jumper cable from Jump Starter and disconnect RED and BALCK clamps
from the vehicle battery. Leave the vehicle's engine running.