| After-sales Service: | 1 Year |
|---|---|
| Warranty: | 1 Year |
| Type: | Injection Blow Molding |
| Structure: | Horizontal |
| Plastic Type: | Thermoplastic |
| Plasticizing Way: | Screw Type |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier A). Adopt YUKEN valves & pumps, JINGHUA semi-computer controller & Siemens motor, FESTO air valve.
B). Applying in DUCTILE CAST IRON can bear high strength not deforming, plate smooth for horizontal injection.
C). Adopt single beam & double pillar design, which highly enlarge the rotation space for 180mm cosmetic bottles & large mould, also mould assembling & removing easier.
D). Applying in double assistant cylinder helpful to main injection cylinder, higher speed mould clamping/opening & save energy as well as providing stable clamping force.
E). Adopt two pumps, one is for hydraulic action & other for mould clamping, which guarantee the 400× 300mm big mould required clamping force.
F). Applying in six-poles motor, lower noise & save energy
| NO. | Item | Unit | Data |
| 1 | Screw diameter | MM | 40 |
| 2 | Max. theoretical capacity | cm 3 | 158 |
| 3 | Cylinder-heating power | KW | 6.5 |
| 4 | Heating zone | Zone | 3 |
| 5 | Clamping force of injection mold | KN | 300 |
| 6 | Opening stroke of injection mold | MM | 120 |
| 7 | Clamping force of blow mold | KN | 30 |
| 8 | Opening stroke of blow mold | MM | 120 |
| 9 | Idle time | S | 6 |
| 10 | Max. plate size of mold L× W | MM | 400× 300 |
| 11 | Min. mold thickness | MM | 180 |
| 12 | Motor power | KW | 15 |
| 13 | Mold-heating power | KW | Tailor-made |
| 14 | Pressure of hydraulic system | MPA | 14 |
| 15 | Max. working pressure of compressed air | MPA | 1.2 |
| 16 | Discharge rate of compressed air | m 3 /min | ≥ 0.8 |
| 17 | Consumption of cooling water | m 3 /h | 3 |
| 18 | Dimension of machine (L× W× H) | MM | 3100× 1100× 2200 |
| 19 | Machine weight | T | 2.5 |
| 20 | Volume of formable products | L | 0.003-0.6 |
| 21 | Height of formable products | MM | ≤ 190 |
| 22 | Diameter of formable products | MM | ≤ 100 |
| 23 | Conveyer belt of motor power | KW | 0.37 |
| 24 | Total power | KW | 22.5 |
A). Neck part is made by injection providing the mouth & screw precision, can 100% matching cap, no any leakage.
B). No clamping line at bottom & clamping line at body side smooth for labeling. Bottle with balance wall thickness & No flash to save material.
C). Body & bottom with strong mechanical strength
Machine Picture:
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}