Infrared Wireless Interpretation System

Good sound quality;

Excellent signal coverage;

5-star recommended.

The TC-908 IR wireless interpretation system is designed to offer audio distribution for up to 8 different languages using the advanced infrared light transmission technology. 

The system operates in the 2-6MHz frequency range which is immune to distortion from hall lighting and free from radio interference, ideally suited for use in business and government conferences, international conventions and other multilingual applications.

TC-Z908
Infrared Transmitter

The TC-Z908 infrared transmitter is a microprocessor based central unit which is designed to modulate and transmit 8 audio channels to different carrier frequencies.  It features independent channel level control, independent channel output level indicators, and independent channel audio output sockets for sound recording.  Test mode produces a different frequency tone for each channel.  Two BNC sockets can link up infrared radiators in two lines.  A transmitter can connect multiple interpreter consoles in a daisy chain.

TC-H25/H35
Infrared Radiator

The portable TC-J908LC infrared receiver is designed to receive 8 audio channels.  The optical lens offers 270° wide angle to pick up the infrared light signal.  The selected channel number, volume level, battery level and signal strength are displayed on LCD screen. Volume level can be adjusted through left/right buttons for comfortable listening. The receiver will be automatically switched off in 5 minutes after the headphone is plugged out.  Any number of receivers can be used within the radiator's effective coverage range in an installation.  The receiver is powered by a rechargeable Lithium-ion battery pack with up to 500 operating cycles.

TC-D3 

Stereo Headphone

• Frequency response: 20Hz to 20KHz
• Impedance: 32 ohms ±15%
• Sensitivity: 94dB ±3dB
• Maximum power input: 30mW
• Adjustable headband & soft foam ear pads
• 40mm drivers with super heavy bass
• 120cm single entry cord with 3.5mm plug
   

  GX-60 

  Charging Case

  • Microprocessor-based unit with smart charging circuit
  • Accommodates up to 20 receivers with Li-ion battery
  • DC 7.5V low voltage charging power
  • LED indicator for charging status
  • About 4 hours are needed to fully charge 20 receivers
  • Receivers can be left in the case after complete charge
  • AC/DC adaptor with power cord
  • Power input AC100-240V 50/60Hz, output DC7.5V 8A
  • Dimensions: 59x30x18 cm (WXDXH)